Software
Houzz Logo Print
petra_il

another backsplash try ... with glass accent

18 years ago

I loved some of the ideas you recommended me, but when it came down to cost ... it just wasn't going to happen. Too bad, I would have loved the horizontal tile like several of the slate ones or like the one mktoni has.

So, it's going to be the basic creamy ceramic tile I can afford. I picked up some glass tiles (which are expensive but since it would be just for accent, I can handle another 30 or 50 bucks).

What do you think about doing something like this? The glass strip may be wider, there will probably be more ceramic on top but I gotta discuss this with the installer too to see what he thinks.

I just drew lines for the grout as the tile color is pretty close to paint that is there now. You can see a detail shot of glass tiles at the link below. I like how some individual tiles are textured.

Here is a link that might be useful: detail of the glass tile

Comments (15)

  • 18 years ago

    Your glass strip should be lower. If it is the high up, most people won't see it in their view because the upper cabs will block it. Just a thought...

  • 18 years ago

    thanks for the tip. I don't know how much it is a concern since the bottom of upper corner cabinets is 5'4" above the floor but will definitely check it before it goes up.

    just to make it clear, the accent strip will be only in the corner, not below the taller cabinets.

  • 18 years ago

    oh, is it so boring nobody even wants to comment?? you guys make me worried ... well, you know, just a little ...

  • 18 years ago

    I think this is a good solution if you need to stick with less expensive field tiles. It will make your backsplash unique.

  • 18 years ago

    I'd say bring the accent tiles down a tad lower too. However, it's really hard to tell from the angle of the photo where they should be exactly. Pretty glass tiles!

  • 18 years ago

    Petra,

    Is it possible to lighten your picture? And perhaps take it from an angle right across? It looks like you are below the counter looking up under the cabinets, and it's so dark, it's hard to see where your uppers end in that corner.

    I think your idea is workable, and you may want to position the glass inserts so that it falls on an even split of your ceramic tiles, but that may be what is placing it a little too high?

  • 18 years ago

    I had a hard time with the photo, too. I think that those glass tiles are really pretty, but I cannot really comment on the rest b/c the angle and color of the photo make me unsure what it looks like "in real life."

    Even if you plan to confine the glass tiles to that little alcove/corner, I'd still bring them a bit lower. Maybe right at the lower edge of the upper cabinets?

  • 18 years ago

    Thanks!!! That makes me feel better, I didn't realize the photo was so confusing ... I'm on a business trip now and can't really do anything about it but I'll give it another try when I get back home.

    The accent strip on the picture is about halfway between the bottoms of the tall and short upper cabinets. I would definitely start on an even split with ceramic tiles for a planned look, wherever it falls.

    I'm not sure I have a good picture of the corner area, it's just hard to find a good angle that would capture the whole area (the kitchen is only 9' on the fridge side and 10' on the longer side)

    You can see more pictures at the link below to get a better idea of the colors. It's little lighter than it appears on my computer but it has a kinda warm smokey feel to it rather than being yellowish, definitely more of a medium than light color.

    Here is a link that might be useful: more kitchen pictures

  • 18 years ago

    I'd really try to make a couple of squares - one on each wall (think "picture frame") - out of those glass tiles and put something in the center. The undercab lighting will highlight this area and it will give you something to look at while doing dishes.

  • 18 years ago

    I love your idea- and agree with everybody about making the glass lower.

    Make sure that you use WHITE thinset specifically made for glass installations. Glass is very finnicky-you have to make sure that the whole surface is covered or the backerboard shows through (I learned this the hard way with the glass installtion in my bathroom-contractor screwed it up and I had to fix and finish it).

    Glass is so gorgeous though, and even an accent adds a special touch. I think it will look fabulous!!

  • 18 years ago

    The glass tiles are really cool, but I'm having a hard time combining them with the basic (gray?) ceramic tiles. I think the hang ups for me are the diagonal lines (which I'm guessing are way more pronounced in the pic than they'd be irl) mixed with the horizontals of the glass tiles. In the pic, the colors also look a little like they don't play well together, but in the close up of the glass detail, the colors seem like they should work with the background tile. So, again, it may be a function of the way the photo comes across the computer. My final problem is that the glass tiles are so great, I'd really love for them to have a bigger role than that.

    Trying to be helpful without offending. Hope I managed.

  • 18 years ago

    the ceramic tile I picked is light creamy color, more on a yellowish side than grey. I probably need to get a better digital camera, the flash on mine is so weak it always comes up darker than it is :(

    I would go for a closer matching grout, so yes, the grout lines wouldn't be as visible. hopefully, anyway. color combination looks better in rl, I promise!

    I'm still trying to decide if I should use 4-1/4" or 6" tiles. I haven't seen too many photos here that would use 6x6 on diagonal for backsplash, those would give me only 2 full tiles under the taller cabinets and I'm not sure about the look.

    sammi2, I just wish they were not 10x more expensive than the regular tile! it would just be overkill ... if you have another idea how to include it in that area, I'm listening. I hope I won't offend anyone though by saying that accent strips underneath all cabinets close to countertops or picture frames are just not my thing.

  • 18 years ago

    petra il: go for the 6" tiles on the backsplash. I love seeing bigger tiles on the diagonal for backsplashes. It's a nice open, airy look, imo. Less labor intensive, less busy looking, and a little less grout to clean, too. :)

  • 18 years ago

    I like your glass tiles and think they will look fine with a creamy field tile. I like the idea of using 6x6 tiles and agree the glass strip should be a little lower. From your mockup, it looks like you are using 4 rows of the glass tile. You may be able to use just 3 rows to save a little money.

    An alternate idea (that I considered) is to install the 6x6 tiles in a pinwheel arrangement using glass insets for the pinwheel centers. The example below would use 6x6 field tiles and 3x3 centers, but for a backsplash I would use 1x1 or 2x2 centers. I suspect this would use about the same total square feet of your glass tile (in a solid color).



    Pinwheel design

    {{!gwi}}

  • 18 years ago

    You can search on mysterymachine's kitchen if you haven't seen it. It has larger tiles on diagonal.