Software
Houzz Logo Print
kardut

pac fab?

19 years ago

Mulling over one of the pool estimates we received, and the PB spec'd Pac Fab filter and pool lights. Did a web search, and best I can make out is that Pac Fab and Pentair are one and the same...is this correct? Is Pac Fab a lower-priced (lower-quality) subsidiary of Pentair or are they truly comparable? TIA

Comments (4)

  • 19 years ago

    Pac Fab is Pentair Pool products. Pac Fab was the original names of the company. Basically sold pumps, filters, skimmers, etc under the Pac Fab name. Was part of a corporation called ESSEF. During the ESSEF ownership Purex, Compool, American Products, Paragon (KDI), Kreepy Krauly, Rainbow companies were purchased by ESSEF for Pac Fab pool division.

    Around 1998 Essef was purchased by Pentair Corporation PNR - NYSE)and the Pac Fab line of equipment as well as all the companies purchased began to change names and fall under one name: Pentair Pool Products.

    There are still many people in the industry that still refer to the old names when talking about equipment.
    Sta Rite is another acquisition acquired under Pentair but because of the high name brand identity and very loyal customer following this is a brand of product that will not be changing names.

    Deek

  • 19 years ago

    kardut,
    Most PB's get familiar and comfortable with a certain product. PB's want consistancy as far as inventory, availability, and quality goes. We are creatures of habit and most will not bounce from one brand to another.
    From a customer standpoint you will probable not have a problem with any major brand. It's nice to match the filter and pump brand and make sure it is properly sized for your pool needs. Good luck.

  • 19 years ago

    Thanks...now I just have to mull over these three proposals and decide which one to go with...probably will be the subject of another upcoming post!

  • 19 years ago

    Many of the current PENTAIR products are new and improved versions of their old merged nameplates. The FNS+ or Clean and Clear filters are basically modern PAC FAB and AMERICAN PRODUCTS filters with some improvements. The old PACFAB filter was always a great money maker when it came to cleaning as it was virtually impossible for the untrained homeowner to put back together. You now have that with the FNS+. I'm always amazed that the same type of filter from Hayward simply falls together when assembling the grid cluster. There are still builders out there who install the FNS DE filter which is a PACFAB but it is really cheesy and make sure you avoid that one.

    PENTAIR kept the AMERICAN PRODUCT light which is an industry standard and the SAM/SAL lights are all built on that model. A great improvement to eliminate the PACFAB light.

    Of course, PUREX has been the industry standard for a long time and most any product still manufactured from that line is excellent. Whisperflo, SMBW filters. Avoid the 4000 series SMBW as it is a big flop. Most tanks crack within 3-4 years. I've never seen PENTAIR step up and answer that one. It's a big ripoff.

    I'd be interested in exactly what a builder is putting in that refers to PAC FAB. There is nothing really used under that name today so use caution.