Software
Houzz Logo Print
carolek_gw

Update on return to quilting

18 years ago

So far, I've reacquainted myself with the Singer 221 and relearned some basic techniques. The rotory cutter was still new on the scene when I stopped doing piecing. My cutter is quite small. Is there any reason to use a bigger one?

As I mentioned in an earlier thread, I discovered that my scraps were not the colors I had envisioned. However---I like the colors I have. They have a distinct West Palm Beach, Miami Vice, art deco palate. It creates a seashore feeling.

So far I have only done some strip piecing and triangle cuttting. All the triangles should be different to preserve the scrap quilt feeling. I'm looking forward to the time when I can piece the puzzle of the blocks. I know this is routine to most of you, but I have usually done pictures that are completely planned out before I cut the first piece for applique. I know all the fabric choices and their placement at the start.

I took a snapshot of my 221. It was new in 1964 or 5. I was given the impression that it was a reissue of the original ones. My mother got hers in the early 40's. I was surprised to note it was made in Great Britain.

{{!gwi}}

Comments (10)

  • 18 years ago

    Rotary cutters: The bigger the cutter, the easier it is to use. I use a 45mm cutter for most work, reserving my little cutter for curves. I personally like the Olfa cutter with the automatic blade cover. Believe me, it makes a world of difference.

    Nice machine in a good color! Singer had plants all over the world including one in Kilbowie, Scotland where your machine would have been made. Because it was made in Kilbowie, it's a 221K.

    Annie

  • 18 years ago

    I will have to get a bigger one then, because I am not finding the cutting that smooth. I had replaced the blade on mine before I quit piecing and it looks to be sharp enough, but I feel like I have to hold everything almost tensely.

    My daughter offered to return my Viking machine, but for my use the featherweight is just fine. I made a lot of clothing with that little beauty, including my wedding dress.

  • 18 years ago

    Glad you are getting back into quilting Carolek. There is not better therapy or relaxation than quilting.

    Love your little machine and how pretty the green is.

    I'll be watching for your quilting project progress. Keep us updated.
    Jean

  • 18 years ago

    Carolek I may have oopsed! Is your machine green or white, my monitor is sometimes off on colors. She's just real pretty either way.
    Jean

  • 18 years ago

    It's white. Maybe its case, which is a teal cast reflected color.

    I have a question. Does anyone recognize the t-shaped piece of metal screwed to the machine? It must be part of some attachment, but my manual doesn't show it. I probably put it in a garage sale years ago. In my attachment box, I don't have anything that seems to go with it.

  • 18 years ago

    That "t-bar" is part of the button holer. It fits over the needle hole (the opposite direction that it is in the picture).

  • 18 years ago

    I've been wondering how your return is going? Good to hear from you! I have a Fiskars ruler/rotary cutter and I love it - no risk of cutting fingers and is easy to use and very accurate. Just push down and slide. I wasn't sure about it when my Hubby got it for me as a gift since I was used to a regular rotary cutter and ruler, but as I started using it, I love it.

  • 18 years ago

    I had a feeling the T-bar was part of a buttonholer. I will check with my daughter and see if I mixed the buttonholer in with attachments for the Viking.

    Thanks for the advice on the cutters. I wish there was a place I could demo the different styles. I go to a weekly bee at my quilt store. I think the owner has different styles, so maybe I can try hers.

    I got in touch with another quilter from my old guild in Michigan. She is one of the few people who will only piece by hand, although she will send out her quilts for machine quilting. I prefer hand quilting, but I have never had a problem with machine piecing. I do some hand piecing if the machine is not handy or convenient. Any other hand piecers out there on our forum? Carole

  • 18 years ago

    I can confirm again the piece you asked about is part of the buttonholer for your machine.

  • 18 years ago

    Carole--If you haven't done so already, be sure to remove the feeddog cover from the bed of your machine so it doesn't scratch it.

    Annie

Sponsored
NME Builders LLC
Average rating: 5 out of 5 stars2 Reviews
Remodeling Company in New Albany, Ohio