Software
Houzz Logo Print
veneziagurl

Discontinued or liquidating door lever source

12 years ago

Hello all

I am a first time poster, but long time reader. I have searched the site for an answer to my question, but haven't found an answer. I'm hoping the collective wisdom on this site can help me.

We are 3 weeks into a major reno covering most of our main floor and a part of the second floor of our home, built in the late 70's.

I would like to replace all of our gold color door knobs with polished chrome lever handles. We are trying to be budget conscious and thrifty (read good quality at the best price possible) renovators. I am trying to find an online source that liquidates door levers that are being discontinued or someone's incorrect order and returned. I have been checking craigslist and kijiji regulary, but haven't found the quantity of matching knobs that I need (9 pass through, 2 dummy knobs and 2 exterior door).

We live in Vancouver, but often order from US websites as we find the savings to be worth the import duty.

Any tips or advice you have is welcome and graciously accepted!

Thanks in advance!.

Comments (3)

  • 12 years ago

    You are aware that different vendors of lock-sets will have different splines for their individual lock-sets, which means you will be changing the entire lock-set, no just "knob to lever."

    Because mfg. will tend to, as a marketing strategy, sell to established vendors, like ACE, TRUE VALUE and MENARD'S, for example, who have a broader market acceptance of "sale" items, rather than to, "quick turn-over," vendors like amazon.

    I've always found that establishing a "recognizable" rapport with local hdw. vendors leads to timely notification of planned obsolescence of inventory.

    You might consider broadening your horizons.

  • 12 years ago

    HI Snoonyb

    Thanks for your reply. Help me understand the first sentence - You are aware that different vendors of lock-sets will have different splines for their individual lock-sets, which means you will be changing the entire lock-set, no just "knob to lever."

    I am reading this to mean that we are replacing all of the hardware that goes in the hole in the door. Is that what you mean? We are so new to this, and don't know what we don't know, so I want to make sure I make use of everyone's knowledge and experience. Tell me if I am misunderstanding what you mean by the first sentence.

    Your idea about reaching out to a local hardware vendor is a good idea. We had a similar experience with a local plumbing supply store that we had done business with a couple of times. They know we are budget conscious and when they were planning to get a new faucet model, they sold us the discontinued floor model at a substantial savings. We both won, they were happy to be rid of the floor model and we were uber happy about the great faucet we were able to get (that otherwise would never have been in our price range) at a price we could afford!

    It didn't occur to me to try this with a hardware company! I imagine that there must be local hardware vendors here in Vancouver... I will have a visit with Google and see what I can find.

    Thanks for the tip - this is an avenue that hadn't occurred to me!

  • 12 years ago

    "I am reading this to mean that we are replacing all of the hardware that goes in the hole in the door."

    Thats correct and unless you stay with the same mfg. you have, you'll find that "knob to lever" will probably not work.

    When you visit the individual lock mfg. web sites, you'll find a PDF of specifications as well as installation instructions.

    Remove one of the passage lock-sets in it's entirety. Make a note of the dia. of the door drillings and where the center of the knob hole is back from the edge of the door.

    There is a learning curve in locking devices, but it is short with a lot of similarities between products.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting