Software
Houzz Logo Print
love_the_yard

Need help Painting this Bench

I purchased this little bench off of Craigslist and would like to repaint it white (see photos below). The rattan top is easily removed, so that will not be a problem. But I have never repainted wood furniture so I need advice. This is going in a bathroom, so it doesn't need to be perfect. I would like to do it as inexpensively as possible. I would really be grateful for some help.

Do I have to strip the black paint off first?
Do I have to sand it?
Can I just start painting over it?
Do I have to use separate primer and paint?
Is there such a thing as an all-in-one primer and paint?
Is there an inexpensive brand of paint that you would recommend?
About how much paint do I need? It is 1.5' H x 3' W x 1.5' D.
How many coats will it need?

I know, a lot of questions. But since I have never done this, any advice at all will be much appreciated!

Carol

Comments (10)

  • 13 years ago

    I would scuff it up, clean it, prime it, then use as many coats of paint as necessary.

    For something that small, I would use spray paint (unless I had the proper left-overs from another project).

  • 13 years ago

    Do I have to strip the black paint off first?
    No
    Do I have to sand it?
    Lightly sand it to take off the sheen.
    Can I just start painting over it?
    Yes, but a light sanding is preferred.
    Do I have to use separate primer and paint?
    You could, but you could also just paint it.
    Is there such a thing as an all-in-one primer and paint?
    There are paints advertised as such.
    Is there an inexpensive brand of paint that you would recommend?
    I like Behr Premium Plus or Premium Plus Ultra from Home Depot
    About how much paint do I need? It is 1.5' H x 3' W x 1.5' D.
    You will probably have to buy a quart, but you will have plenty left over.
    How many coats will it need?
    At least two coats.

    Have you considered spray painting it?

  • 13 years ago

    Spray paint will probably be easier (do it outside or where you have plenty of ventilation), do several very light coats so you don't get drips, it may take two cans, there's not a lot of surface but you'll have lots of overspray getting to every area. If you gave it a coat of primer you might be able to get it done with one can but cost would be about the same. Primer comes in spray too, so you could get one primer and one color paint (about 5 bucks each).

    If it were mine, I would use acrylic craft paint and a smaller brush, and then maybe some highlights in the crevices. Or paint it a light color and do some stencils, you'd get a more polished look and it wouldn't cost much (craft paints are about a buck a small bottle, I like FolkArt Artists' Pigment, has a nice body for coverage unlike some other craft paints (check the bottle for the 'artists' pigment' wording on the front) and it's around 1.20 or so here in the south. Two bottles in different colors would handle that table.

    You could do a shabby effect with chalk paint if you have some plaster of paris and furniture wax. Lots of ways to handle that cute little bench and make it awesome. :)

  • 13 years ago

    The first thing you should do is clean it. If you have mineral spirits, that would be best, but if not, a good degreasing dish soap and a scrubby pad is fine. You want to remove any dirt, furniture polish, oil, grime, etc., or paint will not stick.

    I would spray paint that. Rustoleum 2X or Krylon Dual are good brands, and their whites come in all sheens.

  • 13 years ago

    If you have not spray painted before, here are some tips.

    Wear a dust mask or tie a bandanna over your nose and mouth. It sticks to your nostrils.

    Wear long sleeves, pants, SOCKS, and old shoes. ( once I forgot the socks and had it on my ankles --not fun)

    Wear old clothes, preferably inside out. This way if paint gets on them they are still unstained on the right side.

    Spray paint either in the garage out of the wind, or on the lawn. Cut open a plastic trash bag for a drop cloth. Get some pieces of cardboard to use under the legs.

    Turn the bench upside down and paint the underside first. Then invert, putting the cardboard under the legs, and do the top side.

  • 13 years ago

    If you use a brush, instead of spray paint, invest in a good brush. I prefer Purdy brushes. They are expensive, but I take good care of them, so they last.

    This past week, I painted a small table for DDs new house. I first primed it with Sherwin Williams Prep-Rite Stain Blocking primer. By accident I picked up a crummy brush that DH had put in the paint box. It was positively awful. For the colored coats of paint, I found my Purdy and used it. It was the difference between driving a Yugo and driving a Rolls Royce!

    Also, if you choose to use a brush, add something like Flowtrol to your paint. It will make the brush strokes lay down and give you a smoother finish.

  • 13 years ago

    I want to thank everyone for taking time to write me all of these good hints! I really appreciate it - lots here that I did not know. The family is coming in town this weekend for a week - thought I would get this done before they arrive but it is not going to happen. I will do it week after next and post photos when it is complete.

    Again, thanks to all for your help!

    Carol

  • 13 years ago

    I like this tutorial on how to paint furniture from Centsational Girl. I followed her instructions and am pleased with the results. I'm a visual learner so the pictures really helped.

    Here is a link that might be useful: Centsational Girl

  • 13 years ago

    Carol, I love your rush covered bench. I can't wait to see it re-done!

  • 13 years ago

    I don't have painting advice - but I do love your bench!