Software
Houzz Logo Print
zandra_gw

Patching for cheap decaying siding?

20 years ago

Okay, the issue is I have cheap wood siding that is rotting from the bottom up. this seems to be a problem with moisture collecting at the bottom and dripping off, even though the gutters work and are clear, the weather here from Nov-May is extremely wet and there is usually dew running down the walls in winter even when not raining. I've already paid for all the professional help I can afford, and replaced the bottom half of the siding on the east wall of the house, -it only seems to happen on the east walls where the brunt of the winter rain hits hard. I have a couple months to repaint the house before the rains come, and I want to find some sort of sealant or patching goop that will fill in the small rotted holes along the bottom six inches of the walls. It won't look great, but it's better than nothing. I don't have much emotional attachment to the house anymore as I'm intending to sell the place in the next three years, and I'm not prepared to take out a second mortage so I can replace all the siding just to turn around and sell it. Don't worry, I intend to tell whoever buys it about the problem, and I'm sure I'll take a big hit in the resale value, etc, etc. I'm just sick of all the issues involved with cheap construction! AAH! -Thanks for any suggestions, Z

Comments (7)

  • 20 years ago

    Why not replace it with vinyl siding? I did the front of the house andfound it not too hard and not terribly expensive. If you are planning to sell, it will spruce up the house better than an obviously patch and cover paint job.

  • 20 years ago

    bondo works well for patching wood and of course accepts pant well. if you are thinking about vinyl siding though you want to make sure the guys cap the bottom of the old siding with aluminum sheet metal, from the old siding to the foundation. that way any water that splashes up wont even contact the wood.

  • 20 years ago

    I agree with the above post. Bondo is terrific for patching wood ... just be sure to dig out the rot befor applying. Also you can buy a large 1 gallon can at the big box home centers, which is a lot cheaper then small tubes. You can 'texture' the Bondo if necessary before it sets up to match adjoining wood grain - Good Luck!

  • 20 years ago

    Thanks for the idea, I never would have thought of that, and I have some Bondo to start with in the garage, it might just about cover it.

  • 20 years ago

    Bondo and duct tape: truly 2 of the greatest inventions of the 20th Century... still goin' strong! ;')

    PS: Sounds like the perfect climate for Hardi-Plank or similar fiber-cement siding. I too am tired of homebuilders, especially the big NASDAQ listed hosers, always taking the cheap screw-the-buyer approach to materials and construction.

  • 20 years ago

    Exterior spackle works too!

    I've used MH Heavy Duty Spackle by Zinsser. Sands and paints easily.

    Michael

  • 20 years ago

    You can also use a product called conseal smooth or textured from sherwin-williams. Here in az that is what is used or you can use a product called crack and joint that comes in gallon cans from a distributor called E-Las-tek. Works great on patching and they both are elastomeric so they will expand and contract with the climate and settling of the house.