Software
Houzz Logo Print
party_music50

Help/ideas for interior basement walls?

21 years ago

Hi all --

I bought a house a few years ago, approx 65 years old. It was in serious disrepair... to make a long story short, I hired someone(s) to try to fix the water problems. New roof, gutters, etc., and the mason recommended sandblasting the 12" cinderblock basement walls (MESS!), and then he coated them with a thick layer of "block bond". It looked beautiful at first.

Moisture problems continue, so I now run a dehumidifer almost non-stop [except in winter]. Portions of the block bond are literally bulging, popping out, and cracking in spots, and many areas have a sort of *bloom* that looks like white fuzzy mold (I've been told it's some acid leaching from the cinderblocks?).

I don't believe there's anything more (within reason) that can be done about the moisture in the walls, and I've been using the basement as a gameroom and those areas look so crappy.

Is there anything I can do with the walls to improve the appearance? hide the problems?

Thanks for any help/ideas! :)

BTW: Apparently my neighbors have it worse than me. one just had to have an entire basement wall removed and have the block replaced. :(

Comments (3)

  • 21 years ago

    Clearly, water is coming through your walls as the white stuff is efflorescence (sp?) which is dissolved salts from the concrete blocks being brought to the surface and then being left when the water evaporates. All evidence of a lot of water IN the wall.

    The wall should have been water proofed from the outside with a waterproof layer and proper weeping tile and drainage system. I am sure others can suggest potential fixes, but that is the ideal. I am assuming you have landscaped the property to get water run off away from the house, so you have some potentially expensive issues as there is, in my opinion, no really cheap way to do this.

    In a 65 year old house, there probably isn't any sort of drainage sytem already in place so you have to create one or the basement will never get any better.

  • 21 years ago

    Block Bond or any masonry paint will not eliminate exterior water problems. They can help with condensation issues, but they're not a solution to leakage issues. Now, you didn't say whether all four walls have this problem or if it's just one or two sides of the foundation. There are a few things you can try before going the high price route of excavating all around the foundation and installing a drainage system:

    Â The ground around the perimeter of your house should slope away from the foundation at least six feet, even if that means removing plants to accomplish it.

    Â Your downspouts should send water a minimum of eight feet from the foundation. If they don't, add extensions.

    Â If your house is on a hillside or slope, you may need to have a French drain installed along the uphill side to catch and divert water as it flows toward your house. A French drain essentially requires digging a trench, partially backfilling it with crushed rock, laying drain tile to direct water toward either a dry well or to an open end, covering the tile with more rock, a layer mesh fabric to keep soil from clogging it up, and finally a top layer of soil.

  • 21 years ago

    Unfortunately, the work I had done (as recommended to me) was performed in conjunction with all of the other major repairs that were required before I could even move into the house. Live and learn. :) Without going into further detail, suffice it to say that your comments have given me a better understanding of how I might proceed. Thank you both for replying.