Score1 Cutting: Tutorial
Posted about my Score 1 cutter in my new WIP. So thought it might be helpful to show how it works since some people were not familiar.
This is the Score 1:
{{!gwi}}
It has a blade like the hand held cutters (1) that is lifted by holding down the trigger on the side (2). The cutter can be adusted according to the glass thickness (3). The tension is adjusted for the cutting (4). Finally, you turn the handle on the side (5) as you guide the glass through the design you want to cut.
Design on glass:
Lift the trigger for the cutting blade by pushing down with thumb:
Stabilize glass with hand to hold it level:
Turn knob to move blade over glass as you guide it with your hand:
Snip away excess glass with running pliers:
These have all been cut with the Score1, except for the stems:
There you have it! Let me know if you have any C&C. ~: )
Comments (10)
nicethyme
mylalaland
Related Professionals
Zanesville Tile and Stone Contractors · Nashville Tile and Stone Contractors · Kankakee Tile and Stone Contractors · Traverse City Tile and Stone Contractors · Alexandria Tile and Stone Contractors · Lake Havasu City Tile and Stone Contractors · Baton Rouge Furniture & Accessories · New Orleans Furniture & Accessories · Wichita Falls Furniture & Accessories · Little Rock Interior Designers & Decorators · Charleston Interior Designers & Decorators · Auburn Interior Designers & Decorators · Fergus Falls Interior Designers & Decorators · Lebanon Interior Designers & Decorators · Glenwood Springs Interior Designers & DecoratorshrsgOriginal Author
nicethyme
hrsgOriginal Author
haziemoon
crystal01
hrsgOriginal Author
texaswild
hrsgOriginal Author