Software
Houzz Logo Print
chloe_s_mom

Question: vertical tiling OUTSIDE

17 years ago

I'm agonizing over the design of a bbq island - have had to scale back from a full on outdoor kitchen (eyes are bigger than my budget). I'm not terribly keen on stucco for the base (not sure why, maybe bec of the future style of the garden -English country garden), and am currently debating installing a porcelain smooth tile (the same as my backsplash, but the beige colour) on the cabinet. Anything that I should know about installing tiles outside? I'm worried about them falling off! The base will be made with a silica cement board.

(We're in Ottawa, Canada - snow and the whole bit, not sure if that matters wrt tile longevity).

On the bright side, I think that I've found the granite that I like. Not my photo, but this will give you an idea:

Titanium. Some of the Typhoon Bordeaux slabs spoke to me too (as did this incredible mauve granite in large waves - which would be almost impossible to persuade DH to agree to)

Comments (6)

  • 17 years ago

    WOW!! That granite is outrageous!

    As for your question, You're headed in the right direction using porcelain for your tile. The next thing is to make sure you use a high latex content thinset. I would not use ANY of the bagged modified thinsets that you just add water to. You want to use an UNmodified thinset that gets mixed full strength with a liquid latex additive. A couple of the best would be Laticrete's 317 thinset mixed with their 333 liquid latex, or Mapei's Kerabond thinset mixed with their Keralastic additive. Either one of those would be a top notch thinset for outdoor use. You also want to go the same route with reference to grout. If you're going to use a conventional grout, look for one that's not modified, and can be mixed with a liquid additive. About the only ones I know of anymore who still offer an unmodified grout are Laticrete and Hydroment. I COULD be wrong about that, though.

    Now, let me ask you-- what exactly are you installing the cement board over?

  • 17 years ago

    thanks Bill! Is the liquid additive for the grout the same additive as for the thinset?

    I'm not making the bbq frame thank goodness - using an outdoor kitchen company (many things are best left to the specialists). It is a customized cabinet made with welded steel tube frame that is then hot dipped galvanized (the whole frame). I have a few options, which includes a ready to finish option for the exterior (cedar tongue and groove is an option - a bbq with cedar shakes was passed easily by a fire marshal), stone veneer, stucco (they would do the stucco), etc. And I've opted to go with my own granite company in town (the outdoor kitchen specialists are out of town).

  • 17 years ago

    No-- two different additives. Another one I remembered that still has unmodified grout is TEC.

    As for the kitchen itself, make sure they don't use pressure treated lumber to frame it. That stuff has a bad habit of twisting and warping, which could be an obvious problem. You might also think about using a waterproofing over the cement board, as well.

  • 17 years ago

    thanks Bill - I'll look into waterproofing over the cement board (would it be a membrane? or some sort of sealant?). No lumber used in the frame - only steel.

    Another grout question for you - I've been looking at my first tiling and grouting experience (kitchen backsplash). I've just noticed that between the 1 by 1 glass tiles, the grout is various levels (in other words, I didn't do a good job). Can/should I put new grout over it or do I have to try to scrape out the old grout first.....(I haven't sealed the grout yet - I'm slow on finishing projects)

  • 17 years ago

    For waterproofing, look into two-- either Laticrete's 9235 or Custom's Redgard. Either one will work for you.

    Can/should I put new grout over it or do I have to try to scrape out the old grout first

    You'd need to scrape it out first. The only time you can go over with a second layer of grout is if it's 48 hours old or less. After that, the grout joint needs to be 2/3 empty atleast.

  • 17 years ago

    I think I have a new *favorite* granite! WOWZA!!!