Software
Houzz Logo Print
swampwiz_gw

Electrical and countertop length for various depth sections

17 years ago

I have a question about how ot measure the countertop length for the applicability of the 24" rule for electrical outlets. Basically I will have a stretch of countertop that is 51" long, with a 45" section in the middle that is 28" deep, bounded by 3" sections that is the standard 24" deep (the reason I have it deeper is that I will be putting 2 small countertop ovens there, and I wanted to have a 15" landing area in front.) It seems that this situation is really 3 different countertop sections - 3", 45", 3" - with only the middle section requiring an outlet in the middle. However, if the entire countertop were considered as one section, I would need to put outlets along both of the 3" sections, which would seem ridiculous, if not impossible as the stud would be right there.

So the question is whether this situation would be a 45" or 51" counter.

Comments (2)