Software
Houzz Logo Print
sabelln_gw

help finding a sink

15 years ago

Please be patient with me. I am a newbie! :)

I am looking for the biggest sink that I can fit into a 36 inch cabinet. I know that I want a brushed stainless steel 16 gauge. I am leaning toward a single bowl based on the earlier thread about single vs. doublt bowl. (Whew, I learned lots on that thread.)

Can anyone steer me toward a sink? I was hoping for a 35inch and can't seem to find one. Maybe I just need to be educated a bit more by GW!

Thanks so much.

Comments (4)

  • 15 years ago

    I recently posted the same question. If you search my name below, you can probably find that thread (as I don't recall exactly what I titled it). I was talked out of stainless on this forum, and will be going with the Blanco super single silgranit. Good luck to you!

  • 15 years ago

    I got a Kohler Undertone K-3376, extra-large single basin, with rounded corners and a center drain. It's 35 1/2" wide on the outside (has a very small lip) and 34 3/8" wide inside. It might fit into a 36" cabinet, probably with some modification of the cabinet at the top sides. You'd have to talk to your cabinet maker and countertop fabricator to know for sure.

    This one is 18-gauge, though, not sixteen. I find that it sounds and feels a BIT thin and hollow-ish. It performs just fine, but feels just shy of really solid. I looked for something in stainless in this size that was 16-gauge, but just didn't find anything beyond about 30" wide. I'd also have preferred an offset drain, but traded that for the extra inches in width, which, for some goofy reason (emotional, probably, rather than functional) I love.

    Good luck with your search.

    Here is a link that might be useful: Kohler Undertone extra large, K-3376

  • 15 years ago

    Wow, I'm jealous-36' sink base! The largest I could get into our space was a 27' - lucky you! We went with a Julien UrbanEdge. I have to just scream how cool this sink is! We love it! The 16 gauge is quieter than an eighteen, and much heavier too. My husband was most attracted to its construction, while for me, its gleaming sparkle. Really, it's a handmade work of art. The lower gauge was considerably more money, but will handle dings alot better. This is exactly why my husband went for it despite the price. We are completely satisfied with its performance, appearance, quality and ease of cleaning. We purchased from an authorized dealer.

    Here is a link that might be useful:

  • 15 years ago

    Thanks everyone. I ended up with a Kraus 16 gauge. It is a big old single basin. It came yesterday and is really gorgeous! I can't wait to see it installed. :) Thanks for your help.