Software
Houzz Logo Print
christy_bell

Is this facuet too big?

16 years ago

Well, I wasn't here when they drilled the holes for the faucet and now I think the sprayer is too far forward. It actually would spray towards the front half of the sink. Not sure if I need one with a tighter arc. What do you think? I'm used to a smaller, lower faucet, so don't know if I just need to get used to it. Just seems like I could get overspray.

Here is a link that might be useful: {{!gwi}}

Comments (14)

  • 16 years ago

    It doesn't seem to be the arc so much as the angled spray head. I would like one that size that went straight down.

  • 16 years ago

    I have the Delta Pilar Touch faucet (is that what yours is?) and I thought the same thing when it was installed.

    The water does hit the front half of the sink when it is on full blast but I only have it on full blast when I am filling a pot or rinsing out the sink after cleaning and then I have removed the spray head from the faucet. Most of the time is is just set part way on warm water for hand washing, rinsing dishes and rinsing veggies, etc.

    I have had it for a month now and I love this faucet. Mine is installed on a single bowl under mount and only a couple of times I have had to wipe up water on the front ledge.

    We all have gotten used to all the new features in the kitchen now but it takes a little while.

  • 16 years ago

    that faucet has a 10.5" 'reach'. The holes look like they're standard position to me.

    Interesting tatoo.

  • 16 years ago

    Christyinco,

    I also forgot to mention that I find it very comfortable to work with the faucet. I think that having the flow closer to the front really makes it easier on my back. With my old sink and faucet, I always felt that I was bending forward.

  • 16 years ago

    I found virtually all faucets too big. Crazy big. I had to really work to find one that was normal size. It is not made by one of the standard companies.

    That said, I don't think it's sending water so far forward it's going to blast it out of the sink. The stream doesn't necessarily have to hit the center of the sink. It doesn't even look like you have a center-draining sink, which is what many people aim for -- the water going straight down that drainhole.

    So I think you're left with personal preference. Do YOU like it? Are you getting used to it, or is it still bugging you?

    If not, you can use some Web sites (faucetdirect.com is one -- you don't have to buy from them, but their site is helpful and their customer service is good. I have no financial relationship with the company.) to sort choices by size. The sort will give you a variety of measurements to consider, and a wider range of options than you'd see on display in a showroom. Then you can decide where you'd like to buy. A local shop might still be your best option. They can often order what you want and give you a good price.

    Good luck with your choice?

  • 16 years ago

    >I had to really work to find one that was normal size. It is not made by one of the standard companies.

    What did you wind up with, growlery?

  • 16 years ago

    bumping for the OP

  • 16 years ago

    I have the same Delta Pillar Touch. It took a bit to get used to but know I would not do without it.

  • 16 years ago

    I also have the same faucet and we love it. Yes, especially when you use the spray option, it can splash on the front piece of granite that surrounds the sink, but like the person above said, only when its on full force. Yours is placed exactly where mine is and for the most part, I find it works fine.

  • 16 years ago

    Writersblock,

    I ended up with a Zurn bridge tap.

    I did a quick look and couldn't find a pic of it online. And I don't own a camera.

    Zurn is a large company in, I believe, Pennsylvania that makes mostly industrial plumbing equipment, and faucets for restaurants, schools and hospitals and things like that. I got it from faucetdirect.com.

    So I had confidence it was going to be well made, it was just not a mainstream choice, and it has a slightly industrial look I like. In my almost 200-year-old house!

    And the price was good.

    My point: There are WAY more choices out there than you think. I was frustrated because for months I searched and searched kept coming up against the same choices I didn't like. And then this one popped up.

    I love my faucet.

  • 16 years ago

    I've got the Pilar too... don't think mine is any farther back than yours. I think that you'll be fine when the faucet is in the stream mode. That's the mode I use all the time anyway...I only switch to the spray when I use the pullout feature to wash down the sink or make bubbles.
    Remember that it won't necessarily always be pointing straight forward too. But I think your only bit of splashing would be when it was on full force on spray mode.
    LOVE my faucet!

  • 16 years ago

    How well does the water flow from the faucet line up with the drain?

  • 16 years ago

    Thank you, growlery!

  • 16 years ago

    Can someone explain this to me? The faucet lining up with the drain thing? It seems that some people believe that this needs to happen.

    My drain is at the very back of my sink. I don't think any faucet would line up with the drain unless it was about 8 inches back from the edge of the sink and that would only be possible because I have an island sink. If I did that I would be leaning way over the sink to get anything under the water stream.