Software
Houzz Logo Print
latimore_gw

Dishwasher installation under stone counter

16 years ago

I had a new farmhouse sink installed last week and the same day, my dishwasher stopped working. We've been fiddling with it all week trying to get it to work, but I am not hopeful.

My existing dishwasher is a GE, at least 6 years old, and it has attachment clips at the top that were screwed to the underside of the old plastic laminate countertop.

Today my soapstone countertop was installed. They asked if I was keeping my dishwasher or getting a new one. I said I didn't really know, because I don't know if ours can be fixed. They said that most new dishwashers attach at the sides, not the top. If I get a new one, it should be OK. No blocking was installed.

The plumber is coming tomorrow to hook up the faucets, etc. and he will see if we can repair it.

However, now I am wondering if I have just locked myself into buying a new one, repairable or not, since I elected not to have blocking installed at the top?

Does anyone know? Thanks so much for your help!

Comments (10)

  • 16 years ago

    It is too much of a coincidence that your dishwasher stops working the same day as the sink is installed. . I would get under there and check that the plumbing and electric was hooked up right.

  • 16 years ago

    I've heard that the steam coming from the top of the dishwasher can cause expansion & contraction on the blocking to attach the dishwasher. Which can then cause problems with the stone. I'd see if can get side mount clips for your old dishwasher (it's really not that old). I think this is the best installation overall. If not the clips can be epoxied to the stone .
    Good Luck

  • 16 years ago

    Yes, I thought it was too much of a coincidence too. I did look but don't really know what I am looking for. No water goes to the dishwasher. It's been suggested that maybe some shards of metal got into the line and had things stopped. Hopefully he'll have some advice.

    Thanks so much for your thoughts - sounds like there is a way to make it work either way.

  • 16 years ago

    Make sure the valve is open from the water supply pipe to the dishwasher.
    You do have power to the dishwasher ?

  • 16 years ago

    Thanks billp1 - we checked both water (first) and power (the lights on the control panel work, and it sounds like it's trying to run, just no water). Both OK. I had an electrician who also does some plumbing work here last week for another project - I asked him to look at it and he couldn't see anything wrong. But it definitely is not working! We'll find out tomorrow, I suppose.

  • 16 years ago

    It could be the float which is located inside your machine. check your book and see if you can find it. You might be able to get it to work by just moving it. goggle dishwasher float

    Good luck

  • 16 years ago

    Thanks for all of your help. (I had tried the float - the GE website explained the very scientific method of whacking it with a wooden spoon!)

    The plumber replaced all of the plumbing to the dishwasher when he was here yesterday and it works now. :)

    Still have to solve the problem of attachment. I figured I would try calling GE for side clips first (great idea, granite-girl) and if that doesn't go anywhere, try the epoxy.

    Again, thanks for your help. It is so nice to have this forum for questions like these! (And helpful people on the other end willing to take the time to answer them!)

  • 16 years ago

    Depending on the model, the top clips are actually reused as the side clips. If you retained your old installation instructions, it should say. Or you could try to look for the install guide at the GE site.

  • 16 years ago

    I bet that you now more about dishwashers then you ever thought or wanted to know.

  • 16 years ago

    I hopethat your dishwasher is repairable. But if not, I should note that when we had a quartz countertop put in the fabricators had a metal strip glued on to the underside of the countertop. It provided something for the mounting screws to screw into. Or, most DW have the option of using side-mounting tabs to attach to the cabinets rather than the countertop.