Software
Houzz Logo Print
flseadog

Does the fabricator install the sinks?

18 years ago

We will have a farmhouse sink and a stainless prep sink in our kitchen, both undermounted. I never thought about it before I saw the question on the when the appliances are installed, but who installs the sinks? We have the cabinet installer who will be doing a field construction of the farmhouse cabinet, a plumber for installing the disposal, the appliance folks to install the dishwasher and now a stone fabricator all working in the same area at the same time? I've been so busy with just trying to make all the decisions on what to put in the kitchen I never thought about who coordinates all of this. GC? Me? DH? If this runs true to our experience with this house it'll be me in charge and I know this is when I'll lose it completely. Please tell me this isn't as big a nightmare as I'm envisioning.

Comments (5)

  • 18 years ago

    GC should coordinate. With a farmhouse it will probably be the plumber installing it after the cabinet folks have made the cutout. If it were undermount, the fabricator would probably mount it to the slab.

  • 18 years ago

    I don't know about the farmhouse sink, but if your prep sink is a "regular" undermount sink (i.e., not apron/farmhouse), then your fabricator will mount it to the slab. 24 hours later, the plumber should be in to hook the sink up & install the faucets, soap dispenser, airswitch, etc.

    It's up to your GC to coordinate everyone...that's part of his/her job and what you're paying him/her for!

  • 18 years ago

    Thanks everyone. Sometimes the GC is on top of everything, sometimes he's not. When he's not I try to make sure I know what should be going on so I can at least move things in the right direction. We have a neighbor who was his own GC when he built for the second time. He's says it is for this exact reason---on the first build he had to have constant involvement and finally figured out that he could do what the GC was doing and save money. At this point with my GC I know that if I ask a well timed question I can head off problems instead of trying to fix something after the fact.

  • 18 years ago

    Here is our policy : standard under mount sinks, top mount sinks and soapstone sinks that we make are installed day of installation for the countertop.

    Farmhouse sinks made of concrete, fireclay ect.. we have the Cabinet Shop install. The reason being is that we have never seen a perfectly square farmhouse sink. TheyÂve been off around 1/8th of an inch and greater. The Cabinet shop can adjust the cabinets or if you have a custom shop the best bet is to give them the sink prior to them building the cabinets and they can build a custom cabinet to fit the sink. I personally wouldnÂt have the plumber set the farmhouse sink.. ( my dad is a plumber) since they arenÂt cabinet makers and they more than likely will just put it in place and not level the sink at the top to make it flush with the bottom of the countertop. Plus the plumber should only have to come back in to tie in the water lines, set the fixtures, dishwasher ect.. after the tops are installed.. if he has to make a trip prior then youÂre paying him extra and I know my dad is not cheap..

    Just something I would do but after the farmhouse sink is set in place and before the countertop fabricator arrives I would get a long level and make sure that it is perfectly flush with the top of the cabinets since any gapping would then be filled with silicone and you may or may not see it depending on how deep your reveal is.

  • 18 years ago

    Thank you Mimi for the heads-up on the farmhouse sink. This is one issue I'm going to make sure everyone is prepared to handle when (if) all of this starts coming together. The last thing we need on this is everyone finger pointing on who has the responsibility. I think I'll e-mail the GC today. Thanks again.