Refrigerator End Panels

18 years ago

My DH and I are attempting to install cabinets ourselves. We are having issues sticking with the plan the KD put together. She has proved difficult and we are avoiding going back to her for any further input. She had purchased tall filler and some really flimsy 1/8th"finished panel to construct an end panel. This solution seems to us not to be one for real support,but rather a cosmetic issue. For the amount of work - and the likelihood that flimsy panel will just bow over time,we are wondering if we can just skip the panel altogether and leave the side of the refrig exposed.

We need to determine if refrig end panels need to be used or if they are purely cosmetic. Our refrig is against a side wall (with 3 inches allowed for opening door) on the left. To the right is a standard 12" deep cabinet. The over the refrig cab is 24 inches deep. (the refrig will be standard depth)

If I attach the 24" cabinet to both the back and left side walls do we have to have a panel on the right side?

Sort by:Oldest

Comments (3)

smilingjudy
18 years ago
Nope, you don't have to use the panel. It is decorative only.

For your peace of mind: my over-fridge cab is attached to the wall behind and a pantry cab to the left. The panel is then attached to it and some lower cabs on the other side. So, the cabs are actually holding up the panel, not the other way around.
Buehl
18 years ago
No, you don't have to use it, but..are you sure you'll like the look of the refrigerator sides w/o panels? I'm surprised your end panels are so thin! Ours are 3/4".

What color is your refrigerator? If SS, are the sides also SS? (Our SS refrigerator has black sides). We actually cut our end panel 27" deep to hide the entire side and leave only the door sticking out beyond the panels (yes, it's "counter depth"). For me, not putting the end panel(s) on would make my kitchen look "unfinished"...but not everyone feels that way.

OK....you say the wood panel you have is 1/8"? Is it really a veneer? Perhaps it's meant to be put over a thicker piece of plywood or something. How wide is it? If it's 30" or so, perhaps you can take the finished piece and put it on a thicker piece...wrapping it around the front and over a couple of inches on the refrigerator side (far enough in so you can't tell it's not the entire piece).

Hmmm...maybe she intended to use a thicker piece of plywood (or whatever), attach the 1/8" piece to the thicker piece on the outside, then cover the end w/the filler.

Just a couple of thoughts/ideas for handling the situation. BTW...what are your cabinets? If all else fails, could you go elsewhere and order a 3/4" piece in the same wood & finish? It might be a bit more expensive, but it might be worth it.

You might also try posting on the Remodeling Forum...they may have ideas as well.

Good luck!

Here is a link that might be useful: Remodeling Forum
Related Professionals
McComb Kitchen & Bathroom Designers · Grand Forks Kitchen & Bathroom Designers · Cleveland Kitchen & Bathroom Designers · Wenatchee Kitchen & Bathroom Designers · Lake Charles Kitchen Remodelers · Natchitoches Kitchen Remodelers · San Antonio Kitchen Remodelers · Lynchburg Kitchen Remodelers · North Adams Kitchen Remodelers · Grand Junction Kitchen Remodelers · Daytona Beach Custom Countertops · Springfield Custom Countertops · Houston Custom Countertops · Clearlake Custom Countertops · Sanford Custom Countertops
raehelen
18 years ago
Though it's just cosmetic, if you've already paid for the panel, why not make a 'box' to attach the 1/8" piece to using 1X1" or 2X2"?

If seeing the side of the fridge isn't an issue, will you get your money back for the panel?