Software
Houzz Logo Print
favabeans5

how much labor cost? and time?

18 years ago

how much do you think the total labor cost should be for this? and how long do you think it should take? i guess more like the cost for everything but the cabinets, appliances, tile, fixtures etc..

-demo current kitchen down to studs

-remove all old appliances

-expand 2 switch box to 3 switch

-expand 1 switch to 2 (including 3 way switch)

-install 2 new recessed lights

-install 3 new boxes for pendant lights

-install 6 new outlets

-install undercabinet lighting with dimmer switch

-run new water supply for fridge

-move gas line for range in pennisula

-frame in old window

-run duct and outlet through brick wall for range

-add insullation in kitchen and attic above kitchen

-replace drywall

-prime and paint walls and ceiling

-install 9 new base cabinets, 8 new wall cabinets, couple of panels and fillers and all hardware, moulding etc..

-install all appliances

-wire in cable for undercab TV

-install new faucet and disposal

-install 40sq ft of backsplash tile

-buff and recoat hardwood floors

-replace baseboard

-jack up floor middle of floor 1/2 inches

-install downdraft blowed in the crawl space

anything you think I missed? that you would need to do in demo or install of new kitchen?

any estimates appreciated.. even wild guesses..

Comments (9)

  • 18 years ago

    You have an electrician, plumber, tile guy, flooring guy and GC/Finish carpenter, all to be considered here. People could throw out all sorts of odd numbers, but without a walk through of your home, you'll end up with nothing of value to work with. You also need drawings and permits...another guy to add to the mix.

  • 18 years ago

    oh and

    -removing the textured ceiling..

    forgot that..

  • 18 years ago

    I'm not too sure anyone could just look at that list and give you a fair price. Material and labor costs differ so much from region to region, plus no one here can actually see the job. Your best bet is to get a couple of estimates from local contractors. Find one you are comfortable with and go with that.

  • 18 years ago

    "-install downdraft blowed in the crawl space "

    Am I reading this wrong? You are exhausting into a crawl space?

  • 18 years ago

    you forgot the plaster.

    what type of insulation are you thinking of? do you live in an area with harsh winters? we do, and thus went with Iconene blown in insulation. after many years of frozen pipes several times per winter, I am hoping we've solved the problem.

    the others above are correct that it varies so much based on the quality of the people you hire and where you live. Also will you be a stickler for the detail work or is it more just trying to get it good enough. Here is a wild guess: if the latter, maybe $15K... if you are really picky and want the best people in your home, probably at least double. that is really just a wild guess.

  • 18 years ago

    Yeas, i'd say 14 - 15 K MINIMUM. Depends on where you live, though, and if you have a GC or hire each person separately. Get a BUNCH of bids. They will vary crazily. Please read this forum as much as you can and you will realize that the the lowest bid is invariably not the one you should go with. Go see work sites and and understand that it takes time and energy to find the right team, but you will be MIUCH better off in the end (and especially in the middle!).

    good luck,

    LC

  • 18 years ago

    In general, the cost of labor usually seems to be about the same as the cost of materials. If your buying higher end cabinets and appliances, the cost of labor and detailing goes up. It's a general rule, but it might help.

  • 18 years ago

    Honestly, I don't think $15K is in the ballpark. I was quoted $14K(east coast), for what seems like much less work and my quote did not include demo, painting or finishing floors.

  • 18 years ago

    thanks.. i was thinking around $20kish

    that typo was a bad one..

    the blower itself in the crawlspace but vented outside..