HELP - Plumber Stormed off in a huff!
So the granite people sent a plumber to hook up my sink since the install was delayed and my regular guy was booked. When he arrived I asked if he was aware that plumbers putty should not be used on a silgranit sink. Rolled his eyes and said Of course I know how to install these sinks - I work for XYZ fabricators. Then I see hes using plumbers putty on my drain flange, and I freaked. He jumped up and said - I'm outta here! Slammed the door on his way out and left the sink half installed.
So where does it say that on the instructions? I know I've read it a thouand times here and other places, but its not mentioned on the Blanco instructions.
I called my fabricator and they were horrified at his behavior. I'm waiting to hear back from them now.
Comments (50)
- 16 years agolast modified: 11 years ago
The whole rolling his eyes thing would have done it for me. He was in your home to do his job and treated you like that off the bat? I would not give him a single cent.
- 16 years agolast modified: 11 years ago
Well, consider yourself lucky that he did storm off! If he was doing something you didn't want him doing, then it's a good thing!
Related Professionals
Selma Kitchen & Bathroom Designers · Springfield Kitchen & Bathroom Designers · Muskogee Kitchen & Bathroom Designers · Jackson Kitchen & Bathroom Designers · Portland Kitchen & Bathroom Designers · Hackettstown Kitchen & Bathroom Designers · Ithaca Kitchen & Bathroom Designers · Yuma Kitchen & Bathroom Designers · Eugene Kitchen & Bathroom Designers · Cornwall Kitchen & Bathroom Designers · Sarasota Kitchen Remodelers · Grand Junction Kitchen Remodelers · Mobile Custom Countertops · Sioux City Custom Countertops · Jamestown Custom Countertops- 16 years agolast modified: 11 years ago
Here are the installation instructions, which specify silicone adhesive.
http://www.blancoamerica.com/instructions/UnderIn.pdf
And Blanco's commentary about the same:
"Please note that Blanco recommends that only a professional sink installer/fabricator utilize these instructions for sink installation. The warranty will be voided if these installation instructions are not followed correctly."You're better off without that plumber. Hopefully your regular guy will be available soon.
- 16 years agolast modified: 11 years ago
So sorry for you to have experienced that. And yikes! I didn't know you couldn't use plumbers putty on the silgranites I'm planning. Thanks for the tip. I swear, I learn at least one thing new here every day and I have been here since early in the year.
It's a good thing you caught him. And a good thing he left. You don't want someone with that attitude doing work in your precious kitchen. Hopefully your regular guy can come do it or your fabricator will send someone who knows what he's doing!!
numbersjunkie
Original Author16 years agolast modified: 11 years agoThe instructions refer to use of silicone between the lip of the sink and counter top. But they say nothing about installation of the drain flange. BUT, the plumbers putty (which he left lying on the counter) say not for use on granite, marble, etc.
And now the granite place says plumbers putty is fine for the drain flange - just not under the faucets. And she says my silgranit is a composite so it will be fine.
So much for getting my sink hookup today.
- 16 years agolast modified: 11 years ago
Call or email Blanco. Since they are the manufacturer. I would do that.
- 16 years agolast modified: 11 years ago
So, just because somedays I'm a butthead, I'd like to review this from the plumbers point of view.
The plumber came out as a special favor to the granite contractor to help out their client only to arrive to a client who questioned his understanding of the job. He told the client he was fine and understood and that he did this all the time. Then he did something that you verified was correct installation and was "freaked" at for that work. Then he left the job site rather than work with someone who was "freak"ing at him.
The guy is probably a jerk. Don't get me wrong here. But if I showed up as a favor to someone and had first my abilities questioned and then someone doing anything that could be termed "freaking" out on me I'd be outta there too.
Just saying for the sake of clarity.
- 16 years agolast modified: 11 years ago
I'm not excusing the plumber's behavior either, but micromanaging when one doesn't have a firm grasp of the minutia him/herself, is a recipe for disaster.
This also brings up another of my rants that get people into trouble all the time:
"I read on the internet..................."
- 16 years agolast modified: 11 years ago
It's best when you Know What To Do.
Then you say To Do Something.
(Not just what not to do, like, umm, no plumber's putty.)
Stated more firmly, one must be prepared to deliver a clear positive statement.
Not to ask them if they know how or know as much.
This is "... a firm grasp of the minutia him/herself...." and a command given.
Sure, you could ask them to share and tell, discuss pro and con.
It might work too.
But in this case it appears the discussion never got started.
It didn't get off on the right foot.A vague memory ain't much of a tool when you want to confront someone.
If when the installer arrives you realize you haven't got a clue How To Be Directive with him, it's time to go do a key word search (e.g. Silgranit + putty) and then some back to him to tell him What To Do.Six hours ago I wrote "Reading up in advance is good for the process, but talking about what you just learned is bad for the process.... " and what I meant is that people get discouraged when you the homeowner know enough to be meddlesome but not enough to give a clear new directive.
The way it happened (as presented in the description) it also sounds like the installing party was not able to handle a normal stress and the homeowner was unable to make him stop and talk. Oh well.
Here is a link that might be useful: Starting from scratch - Cost of a new kitchen
- 16 years agolast modified: 11 years ago
The plumber's putty can stain Silgranit, which is why Blanco recommends silicone. Suggest emailing Blanco so you have their response in writing to show to the next plumber.
numbersjunkie
Original Author16 years agolast modified: 11 years agoI think my behavior was not entirely justified, but then he was a jerk from the minute he walked in the door. This guy made quite a few comments like - "You'll never be able to use that top drawer under your cooktop!" while watching the granite guys check the opening for my cooktop. I really felt like he thought I was stupid because I am a woman. And he wasn't doing ME a favor - he was being PAID by the granite company who delayed my install due until my contractor was off on another job and no longer available. BTW - the granite install guys were wonderful and I am thrilled with my new counters. I have also had ZERO problems dealing with any of the other contractors who have been in my home throughout this process.
And there is no phone number to contact Blanco - only email. Probably won't get an answer in time - but hopefully the guy coming today will at least LISTEN to my concerns an not act like a Neanderthal.
- 16 years agolast modified: 11 years ago
Nubersjunkie, Blanco's contact number is printed on every specification sheet for all their sinks. It is 800-451-5782.
- 15 years agolast modified: 11 years ago
There are a number of apparent-tradesmen who respond with annoyance at "uppity" owners on this board, and I just don't quite get the attitude.
Just 'reviewing this from the homeowner's point of view', what on earth is a person to do when they witness a potential mistake -- wait until the job has been done incorrectly and suffer the consequences, which are usually considerable in terms of money, headache and heartache? In my experience it is far more frequent that I will bear the cost of the tradesman's mistake literally and figuratively. To me it makes sense to speak up before the problem happens. It's a lot easier to prevent a mistake than fix it....
Therefore I am sympathetic with "freaking". All the more so because the OP had been *trying* to forestall such a problem, and then seeing it happen is really upsetting. It's like telling your kid: 'I'm worried that glass on the counter edge is going to fall over, please move it' and then 3 minutes later *crash*. If you'd never stated the warning it would have been less upsetting; your fuse is just shot.
I am impressed with the OP for trying to preempt this problem by mentioning it beforehand. My own failings have to do with staying quiet for too long, giving the benefit of the doubt over and over and over and then ... there is that problem. If only I *had* said something perhaps it could have been forestalled?!
So here there is the suggestion that the OP had "freaked" and therefore deserved to have been left. But the OP was trying to do the responsible thing by giving fair-warning of a potential problem. As a tradesman you would *want* that, would you not? Why would you want to shun someone's specialized knowledge that could have prevented you from wandering into mistake-land??
Moreover, which in fairness is acknowledged by the commentor-tradesmen here, the plumber was using the offending substance, only it happens not in the offending place. A simple clarification of the distinction would have mitigated any freaking. Granted, all are in agreement that this guy was likely a major jerk. But by the same token, the OP's reaction seems likely quite justifiable for this and any number of other unmentioned and possibly non-verbal reasons.
- 15 years agolast modified: 11 years ago
SO ............................no one has answered the REAL question.
Does Blanco allow putty on their silegranit sinks??? Knowing the answer to this might change a lot of people's minds.
- 15 years agolast modified: 11 years ago
Numbersjunkie...you were completely justified to be assertive and question the plumber. I, too, am glad he stormed off.
I had a similar experience on Saturday when the counters were installed...but, I'm the one who left in a huff and left my husband to deal.
When I returned two hours later, I was told that two counter sections had to be completely redone (they had ignored my request to bring in the 48" cooktop for positioning purposes.)
Then, I looked at the sink. One side had a slight reveal, a few areas were flush, and the remainder had an overlay. When I said this wasn't acceptable, the worker exchanged some angry words with me and I told him to leave.
Antss...it peeves you that a client would do research on the Internet? Where else can one find information to make informed decsions and choices? Most manufacturers link owners' manuals and many trade association sites have Q&A sections, as well as do's and dont's. Are you suggesting it would be better to just trust the guy/gal who walks thru our doors?
- 15 years agolast modified: 11 years ago
We got the Elkay e-granite version along with the matching strainer. While the installation instructions for the sink specify silicone for the seal with the countertop, it doesn't mention the drain seal.
However, the instructions for the drain installation specifies a "neutral cure" silicone sealant. If not for reading the warnings on this site, I would have gone ahead and used plumbers putty.
Here is a link that might be useful: Elkay Drain Installation Instructions
- 15 years agolast modified: 11 years ago
Oh man, just reading the OP has me angry... when women assert themselves they are "freaking out" and "emotional." When men do it, well, it is perfectly acceptable, and even desired. Evidently, you were supposed to be stupider than you are and you made him feel less manly.
I, for one, fully appreciate assertive women, and am glad he stormed off. Let him have a tantrum elsewhere... by the way, you were the one "freaking out," and yet he was the one who stomped off the worksite? Sounds like projection to me. What a putz.
My experience is that people who are good at their jobs would not feel threatened by you asking questions and/or knowing your stuff. And you were absolutely correct... I just had this talk with my plumber when I bought my granite composite sink, and he told me himself not to use plumber's putty around it.
You're better off waiting for a more professional plumber.
- 15 years agolast modified: 11 years ago
"Antss...it peeves you that a client would do research on the Internet?"
No absolutely not - research as many places as you can! An educated consumer is better for everyone. What I am saying is: the "internet" does not automatically lend legitimacy to something written there. That's my peeve - people saying " I read on the internet that you can't use putty on Blanco siligranit sinks. Well I'm still waiting for the reference to the info Blanco publishes for that on THEIR site or that someone has actually spoken to an engineer at the co. who gave specific instructions about the matter. Simply saying I read on the internet not to use putty is not good enough for me. Blanco's innstall specs don't mention it , but that doesn't make it kosher either.
I am making no comment on the OP's behavior one way or another, I am saying the plumber was unprofessional at best whether or not putty can be used with those sinks. All I'm saying is you'd better be darn well sure of something if you make a big deal about it and that the broad nebulous of "the internet" can get people in trouble.
- 15 years agolast modified: 11 years ago
Step 4 of first installation instruction PDF found in link below says to use silicone adhesive.
It also says "The warranty will be voided if these installation instructions are not followed correctly."
I believe that is sufficient to justify her request.
At any rate, if that is what she asked for, that is what he should have done. It's not like she was requesting something outrageous. It was her sink, her counters, and she was paying him to install it to her specifications.
Here is a link that might be useful: Installation Instructions
- 15 years agolast modified: 11 years ago
All I'm saying is you'd better be darn well sure of something if you make a big deal about it
Why? Why should the person paying for the work be "darn sure" before raising an objection to a material being used in their own house? Why? Is it uppity to challenge big important contractors, to trouble these superior personages with the trivial concerns of a lowly homeowner?
The majority of people who have worked in my house had very large gaps in their knowledge about how to do their jobs. Those who actually did know what they were doing were perfectly comfortable saying, "Yes, some people do say that. But I disagree, because in my experience X is true. It's your call." Those who responded that way generally got the benefit of the doubt.
The world is rife with stories of installers who don't know what they're doing. So nobody should discourage homeowners who raise objections. Once a mistake is made, it often cannot be undone.
- 15 years agolast modified: 11 years ago
A-men, Marcolo. And I'm currently living through a project with daily, hundreds of mistakes. It's really, really, really, really frustrating. It turns out I or my husband knew better how to do something almost 100% of the time. Our problem is not really having much of a clue how to interact productively in a manner that will prevent these problems.
So please all you contractors out there -- please help us homeowners out by telling us *how* we can interact best with you about potential problems, rather than just backing us off into our designated corners. With kids, we all learned about using "I-statements" to preserve self-esteem and prerogative. I wouldn't think that would be the correct approach with a contractor. And evidently "I read on the internet..." won't cut it either. How would you suggest integrating your own knowledge with the contractor's in advance of a mistake?
- 15 years agolast modified: 11 years ago
Aliris, I've found that beginning with "Say, I have a question about this" usually works to open a fruitful discussion.
- 15 years agolast modified: 11 years ago
I agree with antss point. There is a proper way to head off these sorts of issues and it does depend on your familiarity with the technical aspects and details at hand. If you are going to question someone who is sure that they are doing it right, it helps to be sure that they are not.
If you don't know for sure, it's fine to ask the question. ie "Are you sure that's the right material? I want to double check before we move forward, sorry. I know it's a hassle, but let me just call/check/whatevs... blah blah blah" I've done this with things before, sometimes it just held things up for no reason, other times it stopped something from happening.
If you are sure, then taking a stronger tack I think is fine as well, ie "You need to use silicone. Otherwise the warranty is voided. Okay?" If I'm sure of something I have no problem telling a professional to humor me and do it the way I am requesting it. If they can provide a solid reason why they won't/can't then I ask for more time or possible other solutions.
Using the "I read it on the internet" phrase can decrease a contractor or professional's ability to hear you. The internet is a great resource but not everyone's advice on any forum or website is 100% applicable, true, useful or based on experience. It's easy to misinterpret things when you are not well versed in the minutia of any topic. Personally this forum has given me a lot of confidence when discussing things with my architect, GC and other professionals, but only with regards to specific materials, details or specifics that I've spent time researching here and elsewebs. There's a good balance to be had when working with professionals and understanding that their experience is at least partially why they are doing the work and not you, is good to keep in mind.
BTW this is in no ways directed at the OP, I think they handled the situation better than I would have. As a guy I have a tough time dealing with the thought of someone automatically rejecting my opinion based on gender or getting all huffy because I want to have input on the job I hired them to do. Sucks that it happens to many of the women on here.
- 15 years agolast modified: 11 years ago
The plumber who installed my downdraft vent chose to use flexible, rather than rigid, ducting for convenience of installation. I had learned through the Kitchen forum that this was not acceptable, but when I told the plumber this, he scoffed. So I contacted the downdraft manufacturer, and they flat out told me that flexible ducting would nullify the warranty. So I stuck to my guns, and the ducting was replaced. I relate this story as a testament to the power of being an informed consumer.
- 15 years agolast modified: 11 years ago
Numbersjunkie, How did things turn out? You were wise to question the plumbers putty on your Silgranit sink. We installed the sink ourselves. My husband called the company and we were told to use only silicone caulk on the sink both to attach it to the countertop and to install the flanges.
- 15 years agolast modified: 11 years ago
mirz - what does it say to use the silicon on - or for?
Mounting the sink itself to the underside of the countertop - correct? It makes no mention, that I can see, about what to use or not to use with the drain - does it?
"Why? Why should the person paying for the work be "darn sure" before raising an objection to a material being used in their own house?"
Because at the least they might cause themselves problems with the people that are doing the work and jeopardize the end result, or worst they could be asking for something that is not up to manufacturers specs or up to code! Also, the time to raise the objection is before the material arrives not 45 seconds before it's about to be glued in or nailed down.
I have no problem with davidro1's advice - bone up and be CERTAIN about what and how something is to be done and then be clear and direct about what you want done. Some people are begging for and welcome direction. This is something vastly different from micromanaging. None of you would like your boss coming in at the start of each day or every two hours questioning you about EXACTLY how you are going to accomplish your duties for that day would you??? You want some autonomy, yes, but you want clearly laid out goals or expectations.
brickton has some sage advice, everyone should read it again.
coolbeans + et al - while many manufacturers don't recommend flex duct I'm not aware of a code violation as long as it aluminum and not plastic. Also , I know for a fact that BEST/Broan allow for it on their insert hoods and probably others as well. Which manuf. said you'll void the warranty if flex is used???
The main reason that flex is not a great choice is that it is not smooth on the inside and it effectively increases the calculated duct length for every foot used.
numbersjunkie - did you ever call Blanco's tech department for the official answer?
FWIW - silicone has drawbacks too. If there is too much squeeze out, clean up on the sink can be problematic and could scratch your sink if the fella didn't come prepared with the materials and tools to clean up silicone.
There is also a non staining version of plumbers putty available that doesn't have oil in it.
Plumbers putty will stain most species of marble.
Look guys I get it, as I've been on both sides of this equation in several shoes. Customers don't like incompetent tradespeople screwing up their homes because: (they) "we've always done it that way!".
Contractors don't like homeowners questioning their methods at every turn IF they are doing things safely, to manuf. specification and code and according to the agreement. Especially if you preface the conversation with " I read on the internet" or "I saw on TV" If you change the specifications and don't want to pay the increased cost or time - there will be pushback too.
It really goes back to what we all learned in kindergarten: be courteous, play nice with others, figure out how to horse trade and everyone does not have the same level of smarts or athletic prowess.
- 15 years agolast modified: 11 years ago
@antss, flex duct is a code violation in California, which specifies that ductwork for vent hoods, bathroom fans, dryers, and miscellaneous other things that get vented be smooth and metal (or some language like that). We didn't know that when our dryer was installed, and the installation people just used the flex duct that came with it. Every time we get an inspection and inspectors walk past it, they say, "umm, I should really write that down, just so you know...." but never actually do...one of these days our luck will run out and we'll have to fix it, but it does work decently. The bathroom vent fan, not so much---that should have been smooth ducting no matter what it came with, and does need to be replaced.
But, yeah, I have the same problem being assertive about things I know to be correct (let alone those things I'm not so sure about!) There were a few things I didn't push on for this remodel, and should have, which is really frustrating. At the same time, over the years I've definitely been wrong about (or suggested stupid) things too, and wish contractors had spoken up to question it. So it does play both ways...but would be nice if there were a more effective way to communicate!
- 15 years agolast modified: 11 years ago
Interesting - last project I was on in Cali. - I saw lots of flex. 10mil + which is a lot even in CA. Agreed that it's not the best choice especially for dryer ducting and long runs of bath fans because the 4" is not that big to begin with. A short section of 8-12" is not going to be that big of a deal on a stove hood especially if it means getting things centered around a roof truss or floor joist. Sometimes you won't have a choice as there just wont be enough room/height to use ridgid 45 and 90 deg. elbows.
numbersjunkie
Original Author15 years agolast modified: 11 years agoWow - I'm surprised this thread stuck a nerve with so many people! FYI, I never called Blanco, and the granite people who sent the plumber told me its OK to use the putty on the drain (even on a granite/composite sink), but not to mount the sink to the countertop, so I shut my mouth when they sent a second plumber the next day. HOWEVER, I'm glad I chased the first guy off. He was a jerk from the minute he walked into my house. And the plumber who came the next day to finish my hook up told me he was pulling out all of pipes installed the day before and replacing them because I would not have had any space under my sink with the way things had been configured. And I do not see any stains on my Blanco sink from the putty.
- 15 years agolast modified: 11 years ago
Ants, I've linked to a pdf of the 2008 CA Residential Bldg. Code.
Condensed version:
No flexible duct for range exhaust.
Up to 6' of metal flex duct for dryers.
No specification for bathroom exhaust.
[Scroll to the very end of the linked pdf for 'Exhaust Systems.' Pg 37. ]
Here is a link that might be useful: 2008 Residential CA Bldg Code
- 15 years agolast modified: 11 years ago
thanks ci lantro, this just goes to show you code is not always on top of things - especially local code. 6" of flex at a hood is a no no , but I can use it on the dryer where is 10x more likely to capture lint in the creases than smooth duct. I can also have 50' of it on my bath fan rendering a 50 CFM fan practically useless for removing steam from the shower
- 15 years agolast modified: 11 years ago
The instructions on two major brands of plumber's putty specifically warn against using on granite or substitutes.


Also, this person emailed Blanco and was told not to use plumber's putty on the drain and to use silicone instead: Blanco customer service іѕ responsive. I emailed tһеm wіtһ a qυеѕtіοn concerning tһе υѕе οf plumbers putty аnd tһеу ɡοt back tο mе within an hour. Tһеу ԁο nοt recommend using plumbers putty ѕіnсе tһе oils іn іt саח leach intο tһе granite аnd stain.
- 15 years agolast modified: 11 years ago
Wow! - that came out awful. If you follow the link, its in English.
- 13 years agolast modified: 11 years ago
Garden Wed is always helpful and I joined just now specifically to respond to this question. I had a Franke granite composite kitchen sink (dark gray)installed three days ago. The installation instructions state in bold 'do not use plumbers putty as it may stain the sink'. I walked into the kitchen just in time to see the plumber setting the drain flange with plumbers putty.
Every place the plumbers putty touched has a lightened, bleached-looking stain. There is a stained circle around the drain flange where the putty squished out and three stains on the bottom where small dollops of putty dropped.
Just wanted those interested in this subject to know that there is actually a REASON for those directions. Now I have to find out if this is just a cosmetic issue or if plumbers putty will corrode the granite material over time.
- 13 years agolast modified: 11 years ago
I'm glad this thread just re-appeared! I'm going to be installing a Silgranite sink in a couple months, and might not have known this information. I'll be using silicone!
- 13 years agolast modified: 11 years ago
Rabbit, The plumber should buy you a new sink and install it correctly for free.
- 9 years ago
Just listen to and respect your plumber people ,and stay out of the way, if you are talking to him while he is working it will take longer and you could cause him to make mistakes, Only use a plumber who holds a master license then you are guaranteed that he has at least 8,000 hours of documented experience.We know what is best for you. A plumber protects the health of the nation.
numbersjunkie
Original Author9 years agoI am the OP of this thread. I just had silgranit sinks installed in my vacation home, and asked the plumber if he had ever installed one before (rural area) and was he aware that silicone should be used to set the drain flange - not plumber's putty? He said ok and followed my instructions. No problem. I had mfg info ready in case there was an argument like I had before!
I have learned not to blindly trust pros. Some are good but many are not. And many "assume" things they shouldn't. As was the case with my counter fabricator who did not ask about sink reveal; when I brought it up, they said they always just does negative reveal because that's the most common and the "best" way to do it. lol. not for me!- 9 years agolast modified: 9 years ago
Well the with Blanco Fireclay sink you can use plumbers putty on the strainer as long as it is a metal strainer, it is the Blanco plastic strainers that you do not want to use putty on.The sink itself is stain resistant.I personally consider these sinks a poor choice just because there are so many basic every day cleaners that you are not supposed to use on them.A kitchen sink should be a solid durable surface,Stainless is always the best choice.A sink that you can not pour hot water in is just not good.
- 9 years ago
This thread is about Blanco silgranit sinks not Fireclay. Pretty sure you can pour hot water in either.
But I agree about the stain resistance.
We installed a similar Elkay e-granite sink about six years ago and loved the look... at first.
Even though we were careful about what went in the sink, it ended up getting stained and looking pretty bad within a few years.
We ended up replacing it with a stainless steel sink.
It was a pain to find a sink that would fit the granite cutout but we did. Also a pain to remove the old sink from underneath and properly mount a new one under the existing counter.
That, plus paying twice for a sink makes me caution anyone considering one of these.
- 9 years ago
Yeah, not sure why anyone would want a fixture with a porous surface. But yes Blanco states not to pour boiling water in sink without running cold water and not to set hot pots or pans in sink.
- 9 years ago
Where does Blanco state not to pour boiling water in the sink? The Blanco website says the silgranit sink is heat resistant to 536 degrees. Their advertisement info says not to worry about hot pans or pots of water. And I can't find any technical sheets on their website saying otherwise.
Perhaps things have changed with the Silgranit II, and the boiling water was a concern for the old design? I have no idea.
If someone has an actual source for the boiling water info, I would like to see it. I am leaning towards a Silgranit, and while this wouldn't be a deal-breaker, it certainly would be nice to know. Also any info on cleaners you cannot use with it, since the only common materials that seem to be ruled out from their care and cleaning guide are steel wool and straight bleach - not common cleaners for me, but ymmv.
- 9 years agolast modified: 9 years ago
Your image is for the Blanco FIRECLAY sink, not the Silgranit. The Silgranit Warranty and cleaning information sheet, available here, specifically states that damage from heat under 536 degrees is covered, as it should not affect the sink. There is no language at all about hot pots and pans, or running cold water with boiling water. Here is their entire care and cleaning guide:

- 9 years ago
Mark D - I am going to, respectfully, disagree with your statement about listening to the plumber and stay out of his way. There have been many times I have had to step in and correct something. Too many "plumbers" think they know everything and, just like tech, things change, products evolve and while they may have been a master plumber in the 60s, that does not mean the rest of us are dumb and blind sheep.
It is OUR home. If we want a say, then we get a say. We are paying and if they want that pay, they can be respectful and charge for the extra time, if need be, but, in the end.. if it is done wrong and we could have assisted in keeping it from being done wrong, and did not step up and say anything, then that is on us, not the plumber.
So, while this is a really old thread, I too cannot stand when someone steps in and tells us "common folk" what we can and cannot say to the masters of the universe...it's our house. If the master plumbers don't like it.. don't accept the job.
R - 9 years agolast modified: 9 years ago
Another plumber storms off in a huff?
Is it just my computer or did markdangelo11 leave Houzz?
- 9 years ago
Eh looks like it. Shame, whether we agree or disagree, good ideas can be had by all. And bad ones too.. heh
R - 9 years agolast modified: 9 years ago
"Mark D" has renamed himself "Markdangelo11" and removed the "Pro" title from his name.












friedajune