Software
Houzz Logo Print
mommaseed

Help ASAP....builder needs decision on faucet!

15 years ago

Which color would you choose? Chrome, Stainless Steel or ORB?

Our cabinets are a soft white, shaker style (no hardware yet but thinking ORB), counters Cambria Ashford, light fixtures are ORB but appliances are SS and our floor picks up the browns and gold from the Ashford. http://www.reborncabinets.com/cambria-ashford-p-110.html

I do not have a backsplash picked out yet as I am waiting until the house is complete and we move in to see how well the sun lights up our kitchen.

Any feedback, pros/cons of each finish would be helpful. We use our kitchen for three meals and snacks a day!

Thanks you'll!!!

Comments (4)

  • 15 years ago

    I would recommend Satin Nickel, Stainless Steel, or ORB. However, regardless of what your faucet, soap dispenser, or air switch end up, I strongly recommend Stainless Steel for the strainer and drain.

    If you don't like water spots, avoid polished finishes.

    Oh, and look for "Physical Vapor Deposition (PVD)" finishes, as well as washerless and ceramic valves.

    Note that Satin nickel, ORB, and other "specialty" finishes can be ruined by bleach (don't ask), Barkeeper's Friend, and others. In my kitchen I have stain nickel fixtures but SS drains and strainers. (It's in the PR where I made the big mistake...it has satin nickel faucet, commode handle, ...and... drain & drain cover. That's where I now have a corroded/damaged drain after only two years!)

  • 15 years ago

    I also meant to add that I've heard ORB finishes don't always last, but I do not have personal experience with this finish.

  • 15 years ago

    I think either the satin nickel or ORB would work the best. Personally I'd avoid anything with a high shine to the finish.

    I am getting an ORB faucet. At first I didn't think it would be a good idea, I was afraid the black would wear off over time. but I'm getting a delta faucet (Linden pull out with a single lever) and the woman at the showroom said that they have a limited finish warranty (lifteime faucet warranty) so it would be covered if it wore off prematuraly. I do expect some wearing of the finish over time though.

    I'm not worried about matching any of the hardware, lighting, etc. to the appliances. I'm getting some sort of bronze finish lighting fixtures (the kichler chandelier is called tannery bronze and the pendant will either be "earth" or an "aged bronze" depending on which one I get) and the hardware will be flat black and the faucet is ORB (but the basket strainer is chrome because it lasts longer).

  • 15 years ago

    I had a problem choosing also. I posted the question here on GW a while ago, and got lots of good advice. I ended up with a Kohler Vanetta in polished chrome. Someone said that polished chrome will go with anything and is timeless. I agree, and do like the shiny clean look.
    HTH
    Joan

Sponsored
The Steele Group
Average rating: 5 out of 5 stars1 Review
Industry Leading General Contractors in Franklin County, Ohio