Software
Houzz Logo Print
eks6426

Aisle width between counter and banquette

16 years ago

My kitchen basically is basically a straight run. At the end is a prep sink. On the wall opposite the prep area with sink there will be a table with the a bench seat that runs perpendicular to the counter top run.

The wall where the bench seat would be is 113 1/2". Counter top will come out to 27 3/4" (cabinets are slightly deeper) which leaves me with 85 3/4" I originally planned to have the the bench seat and corresponding table be 48" but there is a bank of 3 windows behind the bench seat and I think it would look better if the bench seat sat completely in front of 2 of the windows rather than only being in front of 1 3/4 of the window. To do this, I would need to make the bench seat 53" instead of 48".

This leaves me with an aisle with behind the prep area & prep sink of 32 3/4". Is this enough space?

Here is my layout:

{{!gwi}}

Here are the windows...excuse the in progress pictures. Bench seat with table would go in front the 2 right windows in the group of 3. Chairs would go across the table. Table will be a rectangle 30" X the length I'm figuring now.

{{!gwi}}

Comments (7)

  • 16 years ago

    Oy. This is a hard one. It wouldn't be enough for me, but some people might be fine with it. I think this is really one you have to build a lifesized model for and test. Your bench could use the extra inches too, but it would make me bonkers have kids crawling over each other right behind me like that. Those extra five inches could be the difference between workable and hell.

    Some alternatives:

    • Make the table 48" and the bench 53".
    • Make the table and cushion 48" but extend the cabinetry part to 53" to have a little set a mug area if there should be times when the table isn't there (but mostly just to extend visually while keeping the people where they belong).
    • Extend the woodwork on the wall as wainscoting for the 5" so that the visual balances with the windows but doesn't actually add a bench to trip over every time you take a step back. (My personal choice)
    • Add a 5" decorative element to the end--a post, a pilaster, a flueted edge, or whatever. (My second choice)
  • 16 years ago

    Hmm, great ideas. I don't think I want to do wainscotting since I'm going but maybe a post/flueted edge or something. Wish I could find a picture of this sort of thing.

    I actually think the bench at 53" and the table at 48" could work. Do you think this would look odd especially since I'll have chairs across that are tucked within the
    48" table....

    The picture I posted with the 3 windows at the end is the main view into my kitchen. In fact, you can see that end of the kitchen when standing at my front door so getting this right is critical....

  • 16 years ago

    It's a freestanding table, right? So you could center it when the view is 100% important, and leave it pushed back when it's more about moving around the kitchen. I frankly would be fine having the banquette a different size than the windows, but you know what will look right to you and what won't. If it won't look right to you, then a solution is called for!

    I don't know if it'll work with a rectangular table like that, but a pedestal table might be more comfortable for the sitters, and easier to move around, if it can have long lengthwise feet to balance the top and keep it from tipping.

    Really, really, really...Make a sink counter out of boxes and/or tables, and line it up to a row or chairs or a bench or something, and have your kids squirm in and out behind you while you're trying to make a stack of blocks or something delicate like that. Feel how it really works at both distances. And how it is when you're by yourself too, and if you think the smaller bench will feel better. Watch that you don't use the room under the stand-in as foot space.

  • 16 years ago

    Maybe turn the entire table arrangement a quarter? So the banquette ran nearly the entire 76" but the table was still 30 x 48", long edge of the table towards the banquette with two loose chairs.

    Maybe look at a round or oval table?

  • 16 years ago

    I think what I'm going to do is wait to get the cabinet row installed then do the mock up with cardboard like was suggested. The cabinets are all custom so I will ask if the bench part can be made a few weeks later. The only issue I see with that is they'd have to put my paint back in the sprayer. I'd be fine with hand painting it if necessary.

    Bmorepanic..I'd actually prefer to put the tabble like you suggested but I think the chairs will back into the prep space if anyone sits at them.

    A trial run will hopefully make the solution come to light.

    Now, if only I could skip forward a few weeks past the messy destructive stage and get to the cabinet installation. This is a DIY project and everything seems to take longer than I hoped (and planned). I'm burned out on kitchen reno work right now.

  • 16 years ago

    Too right, it always takes longer! We got all the tile up off the floor this weekend, but thinset is taking forever.

  • 16 years ago

    We pulled up the underlayment so we didn't have to worry about the thinset....

    So, I was going through my inspiration pictures and found the original picture that inspired the banquette set up. In the picture, the bench seat is longer than the table....I'm thinking this could be the best of both worlds.

    Hubby pointed out that I need to pick the table/bench sizes now because I have to decidee how to do the lights. I have 2 pendants to hang over the table. My thought was to center each pendant in front of the windows...so one centered on the right window and one centered on the middle window. But that probably won't work if the table is still only 48"...

    Here are the lights. {{gwi:2109997}}