Software
Houzz Logo Print
akshars_mom

another sink question

18 years ago

We want to go with a 33 inch sink base cabinet for the new kitchen. I want 1 3/4 double bowl sink if possible. we use the dishwasher but also do some hand washing so feel that this will be better fit for us.

I found a sink by ticor (thanks to everyone here). the spec says that the sink needs a minimum of 32" base cabinet. I thought great but yesterday i talked to the cabinet maker and he said he uses 3/4 inch plywood on both sides so we will loose 11/2 inches and another 1/2 inch for face frame I think. he says the 33 inch base will have a 31 inch opening. So now I am not sure if this will fit?

Also if any one knows another sink that would fit into 33 inch base then that also would be great. ANy other places I can find good collection of sinks.

I am linking the sink we are looking at below.

Here is a link that might be useful: ticor sink

Comments (4)

  • 18 years ago

    The Ticor sink link shows a diagram that indicates a 31 1/2 inch clearance requirement and you only have 31 inches. An undermount sink will need further clearance for mounting. You will need to look at another model that will provide sufficiant clearance.

  • 18 years ago

    Wait...is that a 31" door opening or top opening...b/w the walls only? I didn't think a face frame would affect the top opening of the cabinet where the sink drops in, set back 2 or 3 inches inside the front of the cabinet...but I could be wrong.

    Even if so, I have read where others have "scribed" (I think that's the term) the cabinet sides to fit the sink. I'm not sure if that's a good idea, but you might ask about it...

  • 18 years ago

    buehl, he was talking about the top opening. May be the top opening would me 31 1/2inches. so it would be still tight fit.
    These are custom cabinets can I ask him to make it 34 inches sink base? or would that be odd? We dont want to go with 36 inches becasue the sink would be offset by 4 inches from the center of the window. by going with a 33 inches we were hoping to reduce the offset to about 2inches.

  • 18 years ago

    I would really consider going up to at LEAST a 34" base. We JUST put in our sink, and it's nice to have a wee bit of wiggle room. If you want soap dispensers or anything else, you also gain a little bit of leeway.

    Keep in mind that your center stile will be 'off', so it's not quite the same as having to center the old style uppermount sinks that were evenly divided. You can also 'fool' the eye with your faucet placement.

    That sure looks like a good deal on the sink! Ours is almost exactly the same size and we put it in (just barely) into a 36" base. (Ours is slightly bigger- 32 1/8" X 20 5/8")

    Our sink is off centre from the centre of the window by 2", can you tell which side is longer?

    I think that getting the sink that you want is more important than centering it perfectly under the window.