Software
Houzz Logo Print
huango

3cm marble window sill edge: eased or ogee?

13 years ago

Ugh, I'm completely torn about this decision that I have to make TODAY!

So I have these great 5 windows down to the counter, where I'm putting 4"deep x29.5" wide marble sills between each molding (see example picture below).

-->** what edge should these sills be?
A. eased edge, to match my countertop?
B. Ogee edge, to match my window moldings?


2 sides, both w/ supporting/negating facts:

1. EASED:
a. Pro: matches my countertop
b. Con: as 3cm = too thick. Almost like we goofed during construction and had to put it in to hide something

2. OGEE:
a. Pro: very pretty, will match the molding around all 5 windows (similar to the doorway molding- see screenshot example). My windows = my focal point, so adding the ogee is the final cherry on top? My countertop curve at DW/sink/DW is curvy.
b. Con: weird that it doesn't match the countertop ease edge? (but I do have the nice curves at the DW/sink/DW part)
c. Costs more than eased.

Here's my (not very good) mockups:
The left side of the molding = eased edge.
Right side = just an example of non-eased (I grabbed the molding leftover piece)

close-up of eased (look how thick it looks):

close-up of non-eased (missing the horizontal molding on top to close the gap of the windows):


I know Marcolo thinks it'd be weird to go ogee when everything else is eased. But it's so thick.

Thank you very much,
Amanda

marble sills like these:


Molding around my 5 windows will be like my doorway:

Comments (6)