Software
Houzz Logo Print
lisabarnum1

Help with our fireplace

11 years ago
We broke our bank with our house remodel and are left with no face on our fireplace. any cheap ideas would be appreciated!

Comments (22)

  • 11 years ago
    Find a reliable local lime plasterer. It will give your fireplace an old world look and also retain heat.
  • 11 years ago
    is that cheap?
  • 11 years ago
    Just drywall (whatever fireproof board is required) and paint.
    Living Room · More Info

    Living Room · More Info
  • 11 years ago
    How much do you have to spend? Thin veneer Rock is $3 sq/ft. You could tile. I would just stucco for now until you get the money for stone.
  • PRO
    11 years ago
    The plaster idea is great you can also give it a little wow buy using stamps they are $9 at lows good luck.
  • 11 years ago
    We have a gas line brought in to the side of the fireplace and some electricity put in too nothing is hooked up. We were going to put a gas burning insert in. I would of loved to put a cool rock face on it but too expensive right now. We have an old barn beam for the mantle.
  • 11 years ago
    Just parge for now and then come back with the stone when you have the money.
    Lisa Barnum thanked delyanks
  • 11 years ago
    for now paint the cement. add the beam. when you have the money use stone facing.
    Lisa Barnum thanked sacapuntaslapioz
  • PRO
    11 years ago
    You wrote Gas Burning Insert, There is a large difference between an insert and gas logs. Which in turn will affect the design. Gas logs are a good choice. are you doing any labor yourself, do you have the skill set? In your Idea book there are pics of rustic, modern and rustic modern fireplaces. Are these your references. I,m asking all these questions for the designers benefit. The more details the better. I can assist in the technical aspect and I don't have a magic wand but we may be able to come up with something.
  • 11 years ago
    We had thought about putting a gas insert for the efficiency of it. We were told gas logs just suck the heat out. So that is where we were going on that. But at this time we just can not effort to do that. It is a working fireplace but we had torn out all the old blowers that did not work. We r not sure why there are big holes on the sides of the firebox. But someone said it was for heat. Our thought is to fir out and drywall but not sure if we can drywall over the big metal holes. Or even how to finish around the firebox it self. All the work will be done by us ...no money right now. I am sending some pics to get the idea of our style. Some rustic but some contemporary. We are both artists and like to put our own stay to everything. Any feed back is greatly appreciated. Thanks everyone.
  • 11 years ago
    If you were standing in my kitchen you would see to the right the fireplace in the living room. The dining livingroom and kitchen are all one open space looking over a lake
  • 11 years ago
    Are the holes on the side air intakes?
  • 11 years ago
    That is a Heatilator fireplace the side vents are for air intake and the long vent above the fireplace allows warmed air to flow back into the room. We had one in a former house.
  • 11 years ago
    So do I not cover the holes? Is it efficient?
  • 11 years ago
    If you are adding a gas insert it really doesn't matter. You'll probably have a blower. With a gas log set you may want to leave the vents so that all of your heat doesn't escape up the flue. I did my fireplace with cultured stone myself also with a large beam. It was not expensive and is 14' tall.
    Lisa Barnum thanked CCndNH
  • PRO
    11 years ago
    last modified: 11 years ago
    The holes are for heat circulation and should remain open if your using the box as is. You said your changing to either a gas insert or log set therefore, close or cover the holes. The existing box should have a damper that can be opened or closed, did you look up in the flu. If it is gone. it can be replaced. The gas insert is more efficient but they're hard to retrofit in this specific opening. gas logs are great and all you need to do is close the damper when you're not using it. (my preference). Your home is very nice and I would say the style is
    rustic -modern. I looked at you Idea book again, not stalking mind you. The cultured stone is not a hard project but it does take a little diy skills. The surface needs to be smooth, straight and plumb prior to installation. Framing a wall for this is no big deal but before you start on framing you'll need to commit on a design. I remember that your budget is small so I suggest looking at the modern approach using a simple linear outline of the firebox with a tile surround and the rustic beam on a smooth painted wall. this pic should get the conversation on design going. the cost is not bad considering your doing the labor.
    Circa 1700 · More Info
  • 11 years ago
    i see it now. not sure how to finish around box? I think the dry wall would be the cheapest for now with the barn beam.
  • PRO
    11 years ago
    Drywall is good. Be aware that gas logs and an insert still need a non combustible material when close to heat such as a tile surround. Also the tile should be on a cementitous backer that insulates it from the source. please do your research on this for safety, here is one article I found, http://www.bhg.com/home-improvement/tile/installation-how-to/tiling-around-a-fireplace/?page=2. all the best
    Lisa Barnum thanked K.O.H. Construction Corporation
  • 10 years ago
    Just wanted to update my post. This is what our fireplace looks like now. Thanks for all the advice!
  • PRO
    10 years ago

    very nice, you should be proud. Is that stucco ?


  • 10 years ago
    Thx. No it is a wonderful product called Ardex feather finish. It makes it look like concrete.