It sounds as if the carb will have to come apart further. A blockage in the emulsion tube or main jet which reside up in the stem of the carb will cause this. Hopefully all the fuel is fresh. You could try running with the choke on with an ounce of Seafoam in the tank to see if that will bring it around.

Here is a link that might be useful: IPL

If it's not too bad, sometimes you can shoot carb cleaner up inside the tube. I didn't research the model number, but if it's a Honda engine, the carbs are so cheap, it doesn't pay to clean them. Honda of Plano TX sells them for about $17.

Thanks Guys, I'm not familiar with seafoam ? Not sure if its a honda engine,if it is their not very proud of it cause I can't see a name. There is a lot of cowling to remove. I did spray a lot of carb cleaner. I haven't had a chance to try it again with new gas. I'll let you know... Thanks

Baymee do you have a link to Honda parts dealer in plano tx

there is a several in town ? thanks

http://www.planopower.com/

It will have a Powermore engine which is a Chinese knockoff. If you can't get the carb to work on the first try, replace it.