Software
Houzz Logo Print
mbohio13

Help with Tile Grout Color

11 years ago

Hi everyone, this past weekend, I installed tile for a backsplash in our kitchen. The tile used is mostly a 1x2 tumbled travertine brick that is a mix of ivory and tans, from Home Depot (see pics). Now I am completely torn on grout color between the lighter alabaster and the more match-y bone. Initially, I was going with bone because it's the closest to the tile colors itself, but now that the tile is installed, it's actually a little darker that I thought it would be, so I am thinking that using alabaster, which is more or an ivory might brighten up a little. Our granite counters also have a lot of the lighter ivory color too (Venetian gold) so I thought that would tie the tile with the counter too. However, what I am worried about is the lighter color overpowering the tile and then when you look at the tile, the grout lines jump out at you. What I am wanting is a grout that picks up on the lighter colors in the tile, without being a super strong contrast. Has anyone used similar tile and used either bone or alabaster grout? Thoughts or opinions?

Comments (9)

  • 11 years ago

    More pics

  • 11 years ago

    Make up a couple of sample boards witht the different colors of grout and see which one you like best. Be sure to let them dry thoroughly (at least overnight or a couple of days). They lighten up as they dry.

    We ended up picking the 5th grout color we tried, so don't be surprised if the colors are not what you thought they would be. On the other hand, you may not be as picky as my DH was :)

    Also check on sealing the face of the tile before you grout. Otherwise the grout will stick to the stone. This isn't an issue with ceramic or glass tile.

    Pretty pattern on your tile. I like the edge pieces you used. I think you may find that even with a light grout, the pattern doesn't show as much as you think it might because the stone itself has color variation. It would be different with a solid color ceramic tile I think.

  • 11 years ago

    That's a good idea to do some sample boards... the only bad thing is that it will require me to buy a bunch of grout that I won't end up using, but maybe worth it to make sure we get the right color. And I'm about 99% positive there are only two options here, but we'll see!

    Regarding your suggestion to seal before grouting... I actually want the grout to fill all of the holes and crevices, but I understand that even if that's the case, I still need to seal the surface of the tile before grouting. Is that what you were referring to? So the plan is to carefully brush sealer over just the surface of the tile (without getting it into all of the holes and crevices). Then I would grout to allow the grout to get into the holes and crevices. Then seal again to seal up the grout itself. Does this sound right?

    This post was edited by MBOhio13 on Mon, Feb 2, 15 at 13:57

  • 11 years ago

    Just found the perfect example... I want a slightly contrasting grout color like this. Where is still blends, but brightens things up a little. Any color suggestions??

  • 11 years ago

    Anyone else? Color suggestions - bone vs alabaster?

  • 11 years ago

    MBOhio13-Make the tile sample boards. You can stick the tiles on with doublesided sticky tape, and then grout. (Tiles are easily chipped off and reused afterwards). Let the grout dry before you make decisions. Take pictures after this is done, with the boards propped up under the countertops, in good lighting. I will photoshop your choices in place if you like after this, and then you'll have a really good idea of how the two would look.

    Your 'perfect example' has a clean, white counter. Yours is much busier but you have the same lovely dark cabinets . I'd also consider a darker or colored grout, simply because you may need the contrast. I will be the first to admit I can't visualize things (which is why I photoshop) but I'm a little worried about how you're going to tie the tile and the CT in. I'm hoping the light grout will do it, but I'm seeing pink (perhaps my monitor). The right grout may make all the difference.

    Looking forward to seeing your progress! Best, oldbat2be

  • 11 years ago

    I also used tumbled travertine tile for my backsplash with my New Venetian gold countertops. I used an enhancing sealer before I grouted and found that the tile lost any "pinkness" ithad - IMHO, a good thing. The grout did fill in the holes and crevices, even with using the sealer beforehand; it just made the grout easier to wipe off the face of the tiles. My sanded grout blended with the main color of the tiles which made the backsplash a little less busy against the granite.

    So, with that said, make sure you test your grout with sealed tiles so that you can judge the color more accurately.

    If you'do like, I can dig out a picture and find the color name of the grout.

    Helene

  • 11 years ago

    I would definitely test some sealed tiles.

    Lovely space btw!!!

  • 9 years ago

    Trying to pull ivory/tan colors from crema bordeaux granite. Using ivory tumbled travertine subway tile. What color grout to use? Store recommended mushroom or antique white. What do u think about alabaster? Trying to maintain color of tile after enhancer/sealer is applied. No contrast.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting