Software
Houzz Logo Print
arlene_rizzo

Ceiling-how? Thanks!

11 years ago
Hazelhurst Residence #2 · More Info

Comments (2)

  • PRO
    11 years ago

    It's a plaster design. Typically these designs are mostly run in situ. I've been doing this work for years, and design and fabricate many other ornamental spacials and openings.

  • PRO
    11 years ago

    On this particular ceiling I would craft most of the parts on the 'bench'. As far as I can see there are 4 different radius's and the squares are of the same size. Template and 'run' the radius's, run straight pieces of the molding, and 'point in' the square from these straight pieces, and mold these repetitive pieces so as to cast them. Modern technology, architectural plaster 101: Years ago, or today, a thin coat of plaster behind the part to adhere it to the ceiling. Hold in for about one minute until set. It will never come apart, barring issues. Today, a thin coat of adhesive and a 'pin gun' is faster and does a quality and permanent job. It is important to note that this configuration will work with almost any molding as any ceiling. It's 'geometrical/graphical'. A mandala.