Software
Houzz Logo Print
matt_rigney

Soil Sample Analysis

11 years ago

Just got my Logan Labs soil sample back. Hoping Morph (or someone) can give me the rundown b/c I know nothing:-) After talking with the ag-ext office here, they recommended a TTTF for my shaded area where I am wanting to completely redo the yard this year. Not sure if that affects the analysis/recommendations at all. Going to start a separate post with some questions about TTTF.



Comments (4)

  • 11 years ago

    Fortunately, requirements are identical for most lawn grasses, with optimal levels not changing appreciably. For northern grasses, TTTF, KBG, and rye are all absolutely identical.

    Overall, I doubt you have too many severe issues with your lawn that are soil-caused, although there are a few things that require adjustment and will positively impact your grass quality. Your worst shortage is phosphorus, with boron running second. A few other things need a tap or long-term work.

    Can you let me know your general locale? Although I'd like to fold in three apps of phosphorus this fall, that won't be possible in most colder areas. In the recommendations below, I assumed you were in a colder area to avoid any possibility of phosphorus erosion.

    EC 5.4: Sandy soil. Extremely sandy. Your soil won't hold resources well, so retest regularly.

    pH 6.2: Always a symptom when there's a disease. You don't have a problem to set off this symptom very much, just a minor calcium shortage. More below.

    OM 2.5%: Although in the Fair range, I'd like to see this come up significantly. Always mulch mow, mow in all your fall leaves, consider organic feeding, snitch leaves from neighbors, whatever. Raising this will raise the soil water retention and nudge the EC up.

    Sulfur 11: Normal range. Although we have large amounts of margin for playing, we actually don't need it.

    Phosphorus 110: Low, but not deficient. Our target will be 200 on this number. Purchase the cheapest starter you can get your hands on as they'll all target about 1 pound of phosphorus at bag rate. Recommendations below.

    Calcium 58.6%: A touch low, but not severe. In this case, use Encap, Mag-I-Cal, or Pennington Fast Acting Lime as they contain high levels of calcium carbonate and no other elements that I don't want going down. Recommendations below. The total amount given below will actually kick your calcium levels a little high--this is not a problem, I want to account for leaching for the year and for 2016.

    Magnesium 15.6%: On the nose perfect.

    Potassium 7.4%: Although it looks high, this is within reasonable range and we don't need to (or want to) do anything about it. The added calcium will kick a little of the K as well. Higher than normal K levels, within reason, can be an advantage and I keep mine high normally.

    Sodium 1.3%: Although it looks like it's nudging a little high, measured amounts are fine and it's due to your lower EC. Added calcium may kick a little of this, and it's not high enough to do anything about anyway.

    Minor Elements: Boron and copper could use adjustment (copper is a little low, boron is significantly low). Recommendations below. I mentioned iron below as well as this is rather low. Mn and zinc are normal, and aluminum is high but not a problem.

    Boron, Copper: We use Milorganite as a carrier, copper sulfate as the copper source, and 20 Mule Team Borax as the boron source. In a wheelbarrow or the like, dump the Milo. Spraying very, very lightly with water (I use a spray bottle like the kind people use to damp their clothes when they iron) will help the boron stick. Add the recommended amount of 20 Mule Team Borax and copper sulfate and stir, spraying occasionally to get the stuff to stick to the Milo. Then apply over the recommended area. So if going for bag rate Milorganite (1 bag per 2,500 square feet), you'd add 10 tablespoons of 20 Mule Team Borax and 5 tablespoons of copper sulfate.

    You can purchase 20 Mule Team Borax in the grocery store in the laundry aisle (it's a blue and white box nowadays).

    Copper sulfate can be purchased here: http://www.ebay.com/itm/2LBS-Copper-Sulfate-99-Pure-Powder-FAST-FREE-SHIPPING-INCLUDED-IN-PRICE-/271862689893?pt=LH_DefaultDomain_0amp;hash=item3f4c477065

    Pool supply stores also carry copper sulfate. Unless your property is enormous, you won't need very much.

    Iron 45: While this isn't deficient and plants don't have any trouble getting the iron they need to survive, this isn't going to produce very good color (and therefore very good levels of photosynthesis) in your lawn (and gardens). Any time you like (although I'd avoid July under normal circumstances) you can use Milorganite at bag rate to add some organic matter and very slowly raise your iron levels. Both are long-term work. The boron/copper app counts as a Milorganite addition and should produce a short term, temporary green-up of your lawn.

    Recommendations:

    Now: Apply 4 tablespoons of 20 Mule Team Borax and 2 tablespoons of copper sulfate per thousand square feet. Irrigate at least 1/4" afterward to move this into the soil immediately or apply just before a rainfall.

    mid-July-ish, at least 2 weeks post the boron/copper app: Apply 3 pounds of Encap, Mag-I-Cal, or Pennington calcitic lime per thousand square feet. You can irrigate if you wish, or wait for rainfall.

    September 1: Apply starter fertilizer at bag rate.

    October 1: Apply starter fertilizer at bag rate.

    October 15: Apply 2 pounds of Encap, Mag-I-Cal, or Pennington calcitic lime per thousand square feet.

    Memorial Day 2016: Apply starter fertilizer at bag rate.

  • 11 years ago

    In the time I spent writing this, you posted your TTTF question with your locale--extreme southern transition zone.

    Let's slide in an extra phosphorus app this fall:

    Recommendations, addendum:

    November 1: Apply starter fertilizer at bag rate.

  • 11 years ago

    Got the Borax...trying to track down some copper sulfate locally before ordering online. Going to check Tractor Supply today...that's where the pool store people recommended I check. If not, off ebay it will come:-)

    Also, for the starter fertilizer, do you have a brand recommendation or does it not matter at all?


  • 11 years ago

    There's plenty of window in the schedule, as long as the calcitic lime goes at least 2 weeks post the boron and copper.

    For starter, anything is OK and I tend to recommend the cheapest per app rate/thousand square feet. At bag rate, they're all going to target around 1 pound of phosphorus per thousand square feet per application. Whether you use 20-27-5, 18-24-6, or something else doesn't really matter.