Software
Houzz Logo Print
cltw

driveway sealcoat advice

11 years ago

I'm sealing my driveway for the first time, and it is 10 years old never been done. I do have a large crack and some really hairline cracks starting around the edge so I'm patching them with sealcoat and sand. Patching alone looks ugly so hence the sealcoat project.

I bought the Latex-ite Ultra Shield, but it pretty much looks and feels like paint. It says it has sand in it and after mixing it, but there seems to be very little, you can barely feel it. I was thinking of adding playground sand to it since my driveway is really getting pitty thoughout and hoping it would stretch the product further or make my driveway look smoother. Is this advisable? If so how much should I add? Should I do it to the second coat or leave it? Thanks

Comments (10)

  • 11 years ago

    You are correct - it's just paint. IMO it isn't worth anything.

  • 11 years ago

    yep. It makes it all black and shiny again but doesn't add much more than that.

  • 11 years ago
    last modified: 11 years ago

    not helpful. Find a question mark. That is your indicator of the question to answer. No reaffirmations necessary.

  • 11 years ago

    Here's a link that will answer your question:


    Drive Way Sealer


  • 11 years ago

    might as well try this. You're trying to do the same thing.

    add sand to paint

  • 11 years ago
    last modified: 11 years ago

    Fill the crack first, then you can cover over to make it look 'nice' if you wish. Or just fill the crack. Lots of products out there. Self leveling sealant is the best option in this case.

    http://www.homedepot.com/p/Sikaflex-10-fl-oz-Crack-Sealant-427706/203249445

  • 11 years ago

    Adding sand will neither stretch the application square footage nor make it look smoother. You might as well add ground up dollar bills for all the good that any of those products do. Driveway sealers are marketing BS. Save your money. A well done 10 year old drive shouldn't be having the issues that yours is having. Not if the base was prepared properly and it had the proper crown to it and the yard has a swale to limit erosion.

  • 11 years ago

    OK but is the OP supposed to go back in time 10 years and have the driveway installed better? That's kind of, er, water under the bridge at this point. :-]

    Without knowing how big the pits are it's hard to tell what you should fill them with. I'm thinking anything bigger than a thumbprint needs some patching material first. Paint, or paint with sand in it, will just shrink when it dries and you'll have a pit again. There are patching materials in a caulk cartridge, if that's more convenient. Walk along with a putty knife, patch, smooth with a quick stroke, move to the next. When it's all done, paint.

    I suspect any paint that you add other materials to will not be as strong as it was designed to be. I'd leave it alone and put down extra coats if you think it's necessary.

    The best sealant is coal tar based, the stuff that stinks to high heaven, but it's full of toxic polyaromatic hydrocarbons so I don't recommend it. Petroleum asphalt based sealer has much lower PAH content.

  • 11 years ago

    I used the Latex-ite Airport Grade Driveway Filler Sealer (not the "Optimum" sealer) 10-15 years ago and it worked great. This product contains lot of solids, including sand, which fill small crevices and cover the protruding small gravel stones the original asphalt mix. The driveway at that time was 12-13 years old and was showing a lot of bare stones. That is, the old asphalt that holds the small stones together was probably decaying in the sun and washing away in the rain leaving the stones exposed and starting to fall out.

    The sealer filler stopped that process and looked good. It was OK for 10-12 years. During the last two years, some of the sealer started peeling in spots and some small cracks started. I plan to fill in cracks and re-seal again next spring or summer.

    The Optimum line is just cosmetic. Gives a nice even, dark finish to driveway for those who like that look. It does not have the bulk, in the form of solids to "glue" all the materials together or to provide a somewhat thicker coating. You can read and compare solids content of different brands on the containers or at manufacturer's web sites.

    I am not a pro, just my 2 cents.

  • 4 years ago

    One thing of note is that Latex-ite Optimum claims to be "Fiber reinforced", whereas neither the Airport Grade nor the Ultrashield products make that claim. I am hoping that the fiber strands will better help to limit the cracking I experienced with the Ultrashield product that I applied only a few years ago. I have not tried the Airport Grade. I will let you know in a year.