Software
Houzz Logo Print
liz_berger

Cabinets for new kitchen

11 years ago

Does anyone have an opinion on custom-made cabinets via a company or a local person? I heard the ones made by the companies are more durable. Which company is best?

Comments (3)

  • 11 years ago
    last modified: 11 years ago

    Look at construction, rather than companies, for indications of quality and strength within your price range.

  • 11 years ago
    One thing to consider! My sister hired a local woodworker for custom kitchen cabinets. They ended up gorgeous ...but.... The guy threw his back out mid project. The whole house was done and the kitchen project stalled. They couldn't get a Certificate of Occupancy. It really was stressful and messed up their lives for a time!
  • 11 years ago

    The quality of the cabinet is half the decision - the other half is the finish.

    Cabinet differences: 1) Wood selection - do they grab the next stick of wood when making doors or do they check to see if all pieces on one door look similar in color and grain before making that door? 2) Hardware - is it custom cabinet worthy (like Blum or Grass), or is it cheap knock off that may not function for very long? 3) Prep for finish - true custom cabinet will be sanded with successive grits as many as four or five times before finishing. Builders grade may get a once over with 220.

    Finish Differences: 1) Product - Nitro Cellulose lacquers are not recommended for use in humid environments as they are not water resistant. Why then does almost every builder in central OK use it? Cheap, easy to use, minimal sanding as the product melts into previous layers - who likes to sand after all? (I have scraped this finish off many cabinets when ladies use a lot of water-based hand creams. The lacquer sucks that water in.) A better product that will last more than 5 years would be a CAB-Acrylic product or Conversion Varnish - but you have to have a painter that is experienced using these products! 2) Sanding - builders grade cabinets and many finished in place painters will sand two or three times during the operation. Furniture-grade cabinets, true custom, will be sanded four or five before finish work, then sanded again between every coat of product. This ensures not only a smooth finish, but makes sure that each subsequent layer adheres properly. 3) Layering - does the painter try to add all the color in one or two thick passes or does he systematically apply thin coats and sneak up on the final color? This layering ensures that you have the thinnest coats of product and will produce a visible depth that is unmatched by rushed painters. This also makes for an incredibly tough finish that is chip resistant and will last 20 years or more. Having resprayed over 100 kitchens in the first ten years of my business, I can tell you that the finish is what most people dislike about cheaper cabinets or those sprayed in place.

    Hope that helps? Robert