You can purchase a set of panels from subzero for an additional charge. They can be had with a tubular handle or pro handle and with a 4" or 6" toe kick height. Ask your dealer for the part numbers and pricing.

Ahh, thanks. I am looking to do a look some thing like this"

The answer is maybe? Depending on what dimensions the fronts need to be, you might get lucky and be able to use a standard IKEA door or drawer front. (For our DW panel, we used a 24x30 door.)

IKEA used to sell special panels for integrated appliances. They were just flat cover panels (no molding or detail) that were 3/4" thick and matched the color and finish of your doors. I can't find them on the website now so I'm not sure if they still sell them as part of the new system.

IKEA sells what they call end panels and cover panels. They are simple flat slabs of varying sizes that match their door finishes. Perhaps your contractor could fabricate something from those.

You'd have to take a DW panel and cut it almost in half and figure out a way to vote the cut edges.

This would only work with flat doors styles. Anything with a panel won't won't work. Even the flat panels cut will look like they don't belong on a $3000 undercounter fridge.

Learn to love the stainless or have all of the drawer fronts and doors custom made.