Software
Houzz Logo Print
llucy

General question: Where are fillers needed?

10 years ago

Hi, I'm llucy and I love looking at small home plans and play at designing the *forever cottage* I fantasize about having one day. I research things like small versions of standard appliances, drawer stacks, Ikea sizes and such. What I don't know is where fillers should go and how much to allow. Anyone who cares to share their knowledge /opinion I'd very much appreciate. :)

Comments (8)

  • 10 years ago

    I don't know a whole bunch about it but you will need filler if the fridge is up against a wall on one side cause the door won't open completely. It needs to open fully so that the drawers inside can be pulled out to get things and to pull them all the way out to clean.

    And you'll need it in a corner if you don't use a LS or SS but drawers on either side of the corner. There have been those who've found out too late that the drawer on one side of the corner hits the handle/knob (or the oven door /handle) of which ever of those are on the other side of the corner. It ends up they can only pull the drawer out a few inches.

    That can happen if you put a dw too close into that corner area also. When you open the dw the door might bang into the oven handle on the stove if the stove is on the other side of the corner (of the connecting cabinet run).

    Can you visualize what I mean above? 'cause I have no way to do a drawing to post. Let me know if it makes sense to you.

    llucy thanked desertsteph
  • 10 years ago

    I think if you take measurements to a cabinet maker, he should be able to arrange your kitchen cabinets with no....or very little...fillers. Mine has none.

    llucy thanked phoggie
  • 10 years ago

    That's interesting phoggie. I'm not looking for cabinets at this time, I'm playing with designs for a small home I may have one day. I can "graph out" layouts with certain sizes of cabs, but I hadn't heard about fillers into I saw some included in Kitchen Forum poster's plan.


    Looking at my existing kitchen there appears to be a filler on one side of my dishwasher and another between a narrow cab and the lazy susan cab. Two things Steph mentioned. :)

  • 10 years ago
    last modified: 10 years ago

    phoggie, did you have custom made cabs? Sometimes you'll need a filler with certain cabs because they come in set widths and you might end up with a inch or so on a run over what your cabinets widths total up to. If you have a 50" run and the cabs you want only come in 24" widths, you can have 2 cabs at that width and 2" left over... if you used a 36" cab and a 14" cab to equal the 50" you most likely could run into the problem (if they butt up to a corner) where one drawer won't open but a few inches before crashing into the handle on the first cab of the adjoining run. or the stove or dw handle.

    And sometimes the length of the run will still have an inch or so over what your cabinet widths add up to, so they might put a half inch filler on each end. Things like that just pop up when attempting to 'fit' the cabs into a certain amount of space one has to use.

    my goodness - everything I typed above came up underlined in red when I hit 'enter'!

    some of the cabinet lines only use preset sizes like 9, 12, 15, 22, 24 inches wide etc. you've gotta do something with that odd inch here and there.

  • 10 years ago

    We we had our cabinets refaced with real wood and not the manufactured home stuff we needed a filler in a corner. Of course we did not get it because it was re-facing not custom building. So we took the drawer knobs off. I can easily open the drawers with my finger tips with out the nobs. I think I do that with most of the other drawers any way. LOL


    LOVE your kitchen Nancy and remember you doing all of this. Such a big project and it turned out Beautifully.

  • 10 years ago

    Chris, I STILL have one cupboard door that I have to sand and stain, five years after we did the kitchen. It was missing when we finished doing the doors and drawer fronts (we took a lot longer to do all of them than Jim did to do the rest of the kitchen). It turns out that Jim had it in his shop and found it a few months later. It has been in our garage ever since. I keep planning on doing the work on it every time I clean up the garage and run into it. Meanwhile, we have one upper cupboard that has never had a door! We also are missing a few pieces of base molding that Jim never did on the sides of the island for some reason. We never put any stain or poly on the back side of the island, either. Then the kneehole of the desk needs the same base molding and some sanding and staining of an area of wood putty. I guess this is why I should always hire things done> I am not good at finishing projects!

  • 10 years ago

    We also have a corner on the cabinet refacing that needs trim o it. No idea why he did not do it and I keep forgetting to buy a piece of it. So simple. I understand putting things off. And then when you finally do get them done it is like WHY did I wait so long???


Sponsored