Software
Houzz Logo Print
ceruleanblue

LG washers - do they tumble after spin?

10 years ago

My current washing machine has a feature called "shrink guard", and after the load is spun out, it tumbles the clothing back and forth for 10ish minutes to loosen up the fabric. I find it works great to prevent the need for ironing (I don't iron at my house unless it's a dress shirt before a wedding).

A co-worker told me that she has a Kenmore that she was told was made by LG, and after it's spun, it tumbles the load and she doesn't need to turn anything on to do it, it's standard. I'm looking at a new LG and wondered if this is a standard feature on all of them? I read the user's guide and it doesn't address the issue. But I'd love for my clothing to be all tumbled and not just wrinkled and pasted to the drum.

Comments (29)

  • 10 years ago

    My Kenmore built by LG does tumble the clothes after a spin, but it is no more than two minutes. If the load is small, the clothes remain plastered to the drum. You might need to look for the specific feature to be sure the last reverse spin is as long as you need. I have an anti wrinkle spin in the dryer that does something similar.

    ceruleanblue thanked poppy214
  • 10 years ago

    Well rats. It's one of the things I love about my current washer. And the new LG has a feature that only it has, so I don't have a choice but to give up the tumble after spin feature if I get that machine. Unless of course it does it, but the manual just doesn't address it.

  • 10 years ago

    You could send the question directly to LG. The LG manuals are notoriously bad. Is your current machine dead? If you like it , it might be worth fixing. You may already know that current models are very different from models only a few years old: less water, lower standard water temperatures, but larger capacities and some interesting new options.

    ceruleanblue thanked poppy214
  • 10 years ago
    last modified: 10 years ago

    No, it's not dead. I like some features, but I love the second washer pedestal under the new LG Twin. My current machine is 4.5 years old and is being replaced under extended warranty due to paint issues and they can't replace the affected parts as the colour isn't made anymore. The problem seems unique to either my machine or the colour I had. I was using this as an opportunity to sell it as new and get something with a feature I thought would be super useful for me. And my replacement machine won't match the dryer colour any longer which I think is going to irk me. ;)

    So lower water temps? I know my current machine was one that had a reasonable heater to get water to decent temps. I am confused too as I noticed mine says it has a different capacity whether you are on the Canadian or U.S. site. So the LG I'm looking at could be about the same size as what I have now, or larger depending on if you use the U.S. or Canadian specs for my current washer!

    My model is still being made as the top model still from the manufacturer. Maybe it has changed though internally? So maybe I won't like the replacement anyway if water temps are different and such?

  • 10 years ago

    Majority of frontloaders should have a "fluff" tumble period after the final spin to loosen the load from the drum but it's typically not more than a couple mins. Ten minutes of tumble is a "special" kind of feature that you'd have to research/seek-out.

    There are some Whirlpool and/or Maytag models that have a feature called Fan Fresh or a similar term to provide air circulation for a while after the load is otherwise done but I don't know if tumbling for the duration is involved. Some of those models incorporate the fan into an "overnight dry" cycle which involves tumbling but it's intended for very small loads of lightweight fabric such as lingerie.

    ceruleanblue thanked dadoes
  • 10 years ago

    Current machine sounds like an Electrolux??

  • 10 years ago
    last modified: 10 years ago

    Thanks dadoes. My previous Maytags from 2002 and 2006 did not have the fluff after the spin, everything was always pasted. Good to know it's being added to most now. I just looked at the manual and the LG has a "Fresh Care" option that says "This function provides periodic tumbling for up to about 19 hours to prevent wrinkles." So maybe that would be enough to suit me. Sure wish you could try these things out before you bought them!

    And sparky823, you are are correct. Wave-Touch.

  • 10 years ago

    My Whirlpool has the Fan Fresh. Mine can run for up to 16 hours, but present models run for 12 hours. It tumbles periodically during this period.

  • 10 years ago

    Looking at YouTube videos, LG's anti-wrinkle tumble last about one minute. The Fresh Hold options sounds interesting - but I suppose it'll only tumble once every five minutes or so. Whirlpool's FanFresh tumbles for seven seconds every 20 minutes.

  • 10 years ago

    Anyone know if LG uses the internal heater for warm and hot temps as well as sanitize? I seem to recall when I bought my washer a few years ago, it was one of the few that actually used the internal heater for more than just the sanitize cycle. It was one of the reasons I chose it.

    I sure wish LG had more info in their manuals.

  • 10 years ago

    Yes, the LG has a steam option that operates on some of the cycles like heavy duty, whitest whites, bulky and comforter. Understand that use of the steam option will increase the cycle times and all rinses use cold water at least in the US.

  • 10 years ago
    last modified: 10 years ago

    That's not quite what I meant. I also have a steam option on mine that I can add to cycles but the internal water heater on mine also heats the water to a specific temp, even on the warm and hot cycles. Other machines I had looked at just did this by using hot and/or cold straight out of the tap. So if you're not close to your water heater, the water never gets to the intended temp.

    I have an "eco-warm" option that gives you hot/cold combo straight out of the tap, then "warm" is actually heated to the required temp if necessary (so all winter long here likely). And then I have an "eco-hot" which is straight out of the hot tap, then "hot" which is heated to be the hot temp. So warm and hot temps are always consistent, Eco-warm and eco-hot can end up varying since they are straight out of the tap.

  • 10 years ago

    Okay, I looked at the manual more, and it says "Your washer features a heating element to boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings." That leads me to believe that the heater is only used for extra hot cycle and not for hot or warm cycles. That they just mix the hot/cold water. That may be a deal breaker for me. If a warm wash is mostly cold anyway, there isn't really much point to a warm wash.

  • 10 years ago

    As noted above, things have changed in the past few years. Hot is what might be called warm. Extra hot with heater only works with the steam option on selected cycles on the LG. Makes that Electrolux look pretty good, doesn't it?

  • 10 years ago

    I think I may just keep the brand new one that's shipped to me and then wait it out a few years to see what pans out with washer and dryers. Dang, I really wanted that double washer!


    And it seems that I had my eco cycles incorrect, and want to correct in case anyone uses my post as future info. The eco cycles, just use a water temp a couple degrees cooler, but still use the water heater. My manual says you can change the machine to use tap only temperatures (no idea how that is done), but warns you that you will get variable temperatures depending on season and distance from hot water heater in house.

  • 10 years ago

    Wait...if things have changed, does that mean the Electrolux might not heat all cycles anymore? Even though it's the same model? Going to check the manual...(unless it hasn't been updated!)

  • 10 years ago

    We have several regular posters who know the Electrolux well. Perhaps they will check in. Or you could ask another question. Good luck.

    ceruleanblue thanked poppy214
  • 10 years ago

    The LG will most likely heat the wash water during the Sanitary and Allergiene cycles. You can add the Steam option to other cycles but it will give you a steam phase before the actual main wash. I think Steam also disables the temp setting and the washer just heats up to the "steam temp" regardless of whether you had it originally set it to warm or hot.

    Reviewed.com recently tested one of the new LG models and said the Heavy Duty cycle, presumably on Hot, yielded a 98F wash. They didn't say whether that was just the peak temp achieved during the initial fill or whether the washer maintained that temperature.

    ceruleanblue thanked whirlpool_trainee
  • 10 years ago

    Thanks, rpsinfoman. Can you tell me where you got this good information? I did a live chat with LG Canada, and they were about as helpful as a sack of hammers and really couldn't tell me whether the heater was used in other temps. I had to repeat the question 3 times because their answers were "I checked and it has an internal water heater" (thanks I know, I'm asking when it' s used), and "yes it gets the proper temperature for both hot and cold taps" (what does that mean? does that mean only tap temp or that it uses the heater to get the proper temp?), and then finally, she just quoted the part i did from the manual that says the water heater is used for the extra hot temperatures. Apparently the online support doesn't know anymore than what is in the manual.

    And is there no way to quote someone on this forum?

  • 10 years ago
    last modified: 10 years ago

    LG's final comment to me a few minutes ago was "for the water heater it only used for hot temperature. And the cold is straight from the tap". Which still didn't answer my question, and then she claimed my connection was lost and she disconnected the chat. And to get all those helpful answers, I spent 35 minutes on the chat with her. Sigh. I'd avoid LG just due to the customer service, except I know that Electrolux isn't any better and I'm betting the others aren't much different. Haha.

  • 10 years ago
    last modified: 10 years ago

    Yes, over a year of actual use and monitoring, service litrrature, and measurments. All vendors are useless when it comes to this information.

  • 10 years ago

    This really makes one wonder, if manufacturers know their machines at all. You ask them something and they have no clue. It's like the software for these washers was written by aliens who didn't tell the humans at LG their secrets.

    Oh well... if all fails, you can still move to, say, Korea. The new LGs sold there are identical to the US version but they run off 220V, which means they can heat up to 203°F with the actual temps written on the control panel.

  • 10 years ago

    Yea, I don't get it either. I dunno it took me over a year to figure this machine out.

  • 10 years ago

    Someone deep in the engineering/design department knows all these details but it's not made available to front-line, mid-line, top-line sales and customer support reps.

  • 10 years ago

    What dadoes said.


    Back in 2008 I briefly owned an LG FL washer. Before buying, I exhaustively studied the online user manual. It included a sidebar listing actual temperatures. The printed manual that came with the machine was the same as the online version, except the sidebar was missing. I feel like I saw the moment when LG realized that if they don't publish actual temperatures, they're free to change them as they like. Of course this has spread to almost all brands.

  • 10 years ago

    rpsinfoman, which LG model do you have? I noticed the model I am looking at does not have a Normal Casual cycle, it has just "Normal", and "Perm.Press" (which is a useless cycle for me). Then again, who knows if the cycles in the manual are correct as they reference a "sportswear" cycle, and the pic of the machine online doesn't show that, but shows a "Jumbo Wash" that isn't referenced in the manual. Yay for no one having this machine on display and the pics and manual not matching.

  • 10 years ago
    last modified: 10 years ago

    I have the LG equivalent of the 8000. Normal is casual, Jumbo is Bulky. A cycle is just a name change, same thing.

    @sub, yes a lot of detailed data disappeared for whatever reason, some of it to cover up what was done to achieve energy standards. Other cycle and operational data started disappearing with the implementation of smart controls and fuzzy logic. Those precise operations are difficult to pin down because their based on real time sensed data, and the results are programmed with of range of operational changes made on the fly. Temperature control is just a thermistor feeding a resistance value back to the CPU. Those r-values equate to a certain programmed target range of temperature. However as dadoes stated, this goes far beyond marketing and the real information is somewhere deep in engineering and software development. I truly wish the information was available.

  • 10 years ago

    They got a set of the model I'm looking at in store today. It's not Jumbo wash like the web shows, it's sportswear. There is no Bulky on the dial, but there is Bedding. Maybe similar?

Sponsored
Bella Casa LLC
Average rating: 5 out of 5 stars17 Reviews
The Leading Interior Design Studio in Franklin County