Software
Houzz Logo Print
aquaverde

Can we re-flash around windows without pulling the windows out?

10 years ago

We had a leak due to faulty roof flashing above two of our windows during our new home construction. The transom window and sheathing got very wet. The leak has been repaired, and my builder has removed the stucco and cut the house wrap around the windows so that the sheathing could dry out. See picture.

My question is can the flashing be replaced without removing the windows? Or do they need to remove the windows, re-flash and then re-install them?

The Tyvek and flashing tape in generally still in place around the rough opening and protruding out from underneath the window flanges. So I guess we could apply new Tyvek or widow tape over/under/onto what is still there. This is probably what my builder will want to do, but I want to know if that would be acceptable or not.

Comments (4)