Software
Houzz Logo Print
mamabear03

Curtain panels, too much pattern? Do I need more panels?

10 years ago
last modified: 10 years ago

Hi All!

Two questions here:

#1. Do I need a third panel on each side of this window? The rod goes about 8 inches past the window on each side and that is as long as the rod can go. There are currently two panels per side. They do pull closed but I will never close them. They are semi-sheer anyway plus I have the blinds. I don't want to cover up the window any more but I'm unsure how it is supposed to look. Does it look right?

#2. Notice the rug pattern above, and below this is the pattern of the living room curtain.

It's all in a Great Room setting with one open area for the living, kitchen and dining areas. The opposite wall of the living room window we have the dining area with a sliding glass door with a traverse rod which needs panels to cover the sliding glass door. I found below a couple curtains I like, but do these go together with the panels and rug in the living room? Or do the patterns clash?

Option One:

Option Two:

For some reason the pics are rotating in this post, sorry.

Do either of these panel patterns work for the dining area considering that I have a patterned rug and curtains in the living room right there?

Comments (14)

  • PRO
    10 years ago

    You need many more panels this idea of these skimpy little panels on the side of a window is ridiculous IMO drapery even if you never close it should be full enough tobe able to if you want so that would be enough panels to measure at least 2.5 times the rod width and IMO 3 times is better.

  • 10 years ago
    last modified: 10 years ago

    When pulled closed these panels overlap in the middle. Are you saying i need 4 per side? They also are pictured in the original post overlapping the window itself by a couple inches while open. How far in front of the window are they supposed to be when open? Why would anyone want to obstruct the window view?

  • 10 years ago

    Also, what about the patterns regarding the dining window/door? I need to order something ASAP.

  • 10 years ago

    There are 2 per side already but yes they are thin/semi sheer. Do they need to cover the window glass further while open?

    Any thoughts on the patterns?

  • 10 years ago

    Please do not mix the patterns. To see the beauty of the panels they need to be brought in over the window more & I'm thinking for this you will need an extra panel plus lining on each side. Usually 2-1/2 to 3 times a width of the total window is necessary to look professionally done.

  • 10 years ago
    last modified: 10 years ago

    Hi! I'm not a designer, we just had our master room done though and our designer took the rod out about three feet past the edge of the window so they have plenty of room to spread. I thought that was crazy at first, but it looks so gorgeous. The curtains are also lined really heavy so they have lots of body. And you're right, you don't want to cover the window view, that's why it's better to take the rod out. Makes the window look very grand.

  • 10 years ago

    Unfortunately this was the longest rod I could find locally and it cant be returned. Thanks for the advice though. Maybe eventually I could use this rod in another room? I dont know what the purpose is of semi sheer curtain panels if i need to pay twice as much for liners now.

  • 10 years ago

    HI -- Get a rod extension to go with your rod and have the rod go to the side wall and equal distance on the other side and add another panel on each side and then spread the panels out a bit to cover to the end of the rod and even out the folds . They do not need to open and close when you have the blinds , just have then be stationary .

  • 10 years ago

    I didnt know there was such a thing as an extender. I wonder though where to find these and if the rod color i have will match? Thanks. I hope that works.

  • 10 years ago
    And to answer your second question, neither of these panels look like they will go with your rug or your other panels. If you can't find the same pattern for the sliding door, maybe a solid that matches the others in color?

    When mixing patterns remember that if they are different scales of print they look better. This link offers some good tips.
    http://www.tidbitsandtwine.com/10-tips-for-mixing-patterns-like-a-master/
  • 10 years ago
    last modified: 10 years ago

    HI -- You should be able to get a matching rod extender where you got the rod from. Any Window Covering section or store will have them . You will not need a heavier drape fabric because most of the fabric will be covering the wall.

  • 10 years ago
    last modified: 10 years ago

    Is this one large fixed window? If this is a double or triple window, then you could add another panel over the framing between the windows; however, since you don't want to cover any more of the window than necessary...

    You could add a matching valance between the panels on the same rod. Your valance could stop at the bottom of the window frame at the top of your window. Use a valance with a straight bottom.

    If you cannot match the drapes with a valance, a solid color matching the dominant back ground color likely would do.

    If you cannot get a true match -- pattern or solid -- then you could use a double rod and then either add sheers behind your existing drapes or add a valance in front of your current drapes that covers the entire top of the drapes and in between.

    Something else you could do is add a wood or fabric covered cornice above the windows that would cover the wall above the window and cover the top of the drapes -- stop the cornice at the top of the window frame.

  • PRO
    10 years ago
    last modified: 10 years ago

    It seems to me that you have quite a stack back on these so I don't think you need any more panels, you just need to pull them out over the window a bit more. You are rightly responding to the panels being out of proportion to the size of the window. Just try pulling them over more so that they are almost halfway into the side windows. It will make a world of difference. The only way you can fix the proportion and not cover any more window, is if you extend the rod out further from window to create the correct proportion. Even then, you shouldn't need any more panels (as long as you never pull them closed, as you said. If you have a need to pull them closed, then you will need more panels. But since you have the blinds, the panels can remain stationary.