Software
Houzz Logo Print
lovesthebluewaters

Bamboo flooring install help!!!

10 years ago

We just had 1000sf of engineered bamboo installed in our basement, & I'm afraid it was done wrong. It came in a box with 2 planks "clicked" together & they installed them that way rather than take them each apart. I'm afraid this doesn't look right (with seams of 2 planks together) & may be unstable. It's driving me crazy & I'm thinking of asking our contractor to take it up & install it plank by plank. I'm sick to death over this. Any thoughts on what we should do or if this looks ok?? Thanks so much for any help.

Comments (4)

  • 10 years ago

    No one owned a tapping block?? Geez. Do over.

  • 10 years ago

    "I'm thinking of asking our contractor"


    If he was a contractor you would not need to ask, he should never have called the job done. As Sophie says that is a do over.

  • 10 years ago

    That is absolutely unacceptable. floor needs to be taken out and redone. Is it glued or nailed down? if so then they will end up destroying the flooring taking it out, which means buying new material and reinstalling.


    are those 1/2" gaps between the boards? that just looks really bad, like they had a tile guy install wood floor or something ><

  • 10 years ago
    last modified: 10 years ago

    Oh! Ha ha ha! I think what you guys are talking about is a dark shading design between each plank that is like an "antique" effect--there really is no gap! (I'll try to attach a pic of the planks so you can see this shading.) But, I could see how you'd think that from the pics. Fortunately, it is not THAT bad! It's actually hard to see how it's laid, but if you look closely, you can see seams at the end of 2 planks laid side by side in every row--instead of staggering EACH plank, they laid 2 planks together of the same length (the way it came in the box) and staggered those. I did call a rep from the manufacturer, who (after he stopped laughing about how ridiculous it was that our contractor laid them like that simply because they were shipped that way for packaging) said not only that is an improper installation, but it would affect the stability of the floor and actually VOID the warranty to leave it that way. Therefore, we definitely are going to ask our contractor to re-do it correctly. Thank goodness it is only clicked together, so it should be easy to take up and re-do. We will probably have to order another box, but that's ok. It really is a beautiful floor. Thanks so much to everyone for taking time to post. FYI, here's a close-up of the planks from the mfr's website, so you can see the dark shading between planks that is simply how it's designed: