Software
Houzz Logo Print
marc555

Calcium, hard water, pH

10 years ago

The last 2 years I grew a tomato each year in a 20 gallon tote with Al's 5-1-1. I added Osmocote to the mix. As my water is quite hard and alkaline (280 mg/L CaCO3), I did not add calcium. My water has a calcium level of 80 mg/L. The plants were very healthy, but the tomatoes had a bad case of blossom end rot (BER). I immediately gave the plants a handful of lime mixed with water, and the BER disappeared. I was concerned that the lime might raise the pH to a level harmful to the tomatoes, but they seemed just fine with it. This year, in hopes of avoiding BER, I added a tablespoon of lime for each gallon of 5-1-1 mix.

For you chemists out there, I'm wondering why the calcium in my water did not prevent BER. Was it simply not enough, or is there something else going on?

I also grow a lot of hardwood trees in containers. I fertigate these with water injected with a 24-8-16 fertilizer and enough sulfuric acid to bring the pH down to 5.5-6.0. The trees generally look good, but I'm wondering if they also might benefit from a dose of calcium. Is the calcium in my water insufficient for the trees as well as the tomatoes? If so, how much would you add?

Thanks,

Marc



Comments (11)