Software
Houzz Logo Print
dcustode

Scherr's leg levelers, ugh!

10 years ago
last modified: 10 years ago

Hi all,

We're redoing our kitchen with Ikea boxes and doors/panels/etc from Scherr's. It's going to look awesome, but we are running into some difficult with the toe kicks. They don't come with instructions and it doesn't look like it's going to be easy to get the toe kick onto the legs. Has anyone used their legs and if so, can you give me some advice on how to install?

I'm guessing you are supposed to attach both the plate (black part that attaches to the toe kick) and clip (part that clips around leg) onto the toe kick and then snap onto the legs, which in itself looks like it will be challenging, because although the clip slides into the plate, it does not slide easily at all, so it's not like we'll be able to make a ton of adjustments when we're ready to clip them on.

The bigger problem is getting the plate onto the toe kick. The holes in the plate make no sense to me. They are not big enough to accommodate the screws they've sent and they have these tracks on either side of the plate, the purpose of which I don't understand. Here's a pick where you can see the track on the back side...

There's another track on the other side of the plate and the hole is in the middle of the plate where the two tracks meet but they overlap in a way that makes the hole too small.

Can anyone out there help me understand how this is supposed to work?

Thanks!

Danielle

Comment (1)