Software
Houzz Logo Print
slsolomon

Water seeping through cement foundation

10 years ago
During a renovation last winter we excavated to "damp proof" the perimeter of our house.
We just saw water again seeping through to an inside wall of the basement
The contractor had assured us this would never happen again

What to do?

Comments (7)

  • 10 years ago

    What exactly is the meaning of "damp proof" per your contract? How was the "damp proof" accomplished? What products did he use? Have you called him to come take a look?

  • 10 years ago

    Obadyke and a sealer

  • 10 years ago

    I hate water. am working on a house with full French drains and a sump pump, so now we're getting water directly through the (new) floor. #headdesk

    hope you find a good solution! this stuff is crazy-making.

  • PRO
    10 years ago

    No kidding ,try the contractor first stuff happens we are all human . Did this actually get dug up all around the perimeter or something put on the inside I cannot find any info on a product called obadyke so I have no idea what he did but really the only way is to dig down and waterproof from outside with proper drainage installed

  • PRO
    10 years ago

    Exterior work has a better chance of success than interior sealing. There is so much that has to be done to stop this from happening it is expensive to get to the point of "water proof".

    The exterior work includes digging a trench around the ENTIRE perimeter of the home. Then applying a moisture barrier to the exposed foundation. Then adding in french drains, etc. Then they back fill to the foundation making sure to SLOPE the ground away from the home (this adds more expense to this job).

    Then you have all the gutters and down spouts PROPERLY inspected and proper drainage AWAY FROM THE HOUSE installed. Again this needs to be done TOGETHER with the exterior sloping and drainage. You will also need to have things like driveways, porches, patios, etc looked at to ensure they all slope/drain AWAY from the home. If they do not, you will pay someone to FIX that slope (rip it up and do it again).

    At some you will pay someone to install a sump pump (with back up generator for power outages,etc during storms). And if you have any money left you can look at applying a roll-on/spray-on membrane to the INTERIOR of the basement (you have to do this to every square inch of concrete...if you have drywall you need to REMOVE the drywall to expose every stick of concrete in the basement).

    The "interior" application would only be needed after you spend thousands and thousands and thousands of dollars on the exterior (don't forget the sump pump) and you find you STILL have moisture intrusion from time to time. That's when you look at an interior application. Interior applications are very expensive and the least trust worthy.

    What exactly did you have done? I'm going to guess it was not to the extent seen above.


  • 10 years ago

    Benjamin Obdyke would be the company to which you are referring. They make a hydroflashing but that would be it and it is a flashing with the widest being 12" rolls. What type sealer did he use? What does your contract say for a guarantee or warranty?