Software
Houzz Logo Print
rezhen_mohamadamin

Acidic soil for blueberries

10 years ago
last modified: 10 years ago

Hello,

I was wondering if I can get a few pointers about how to acidify the soil for blueberries. I have about 21 different varieties of blueberries I have. I planted them in containers ranging from 9 gallon to 20 gallon containers. This is due to heavy clay soil in my yard. Basically, I used peat moss, garden compost, perlite and black gold organic potting soil and I mixed them together. I have a ph meter that I bought for $10. And it read between 6.5 and 7. I had a few trees that I chopped down last year, so removed the top 6 inches of the soil around the blueberries and mixed the removed soil with wood chips and pine needles and refilled the pots. I also added a few inchest of pine needles as mulch around the plants. The ph meter still read 7. So then I added soil acidifier which contain sulfur a few days ago and still had the same reading. I went to Starbucks and picked up used ground coffee and put a hand full around the blueberry plants and still read 7 on the ph scale. Am I doing something wrong or is that ph meter not functioning correctly? I planted these plants less than 2 weeks ago so I'm not sure if it takes time for the ph to go down. Please let me know if I'm missing anything. Thanks

Comments (10)

  • 10 years ago

    My first suggestion is to get a pH test kit with the little capsules of powder to test the soil. These typically cost less than $8 (Rapidtest 1612) and contain enough capsules to perform 10 tests

  • 10 years ago

    Sulfur takes a good few months to lower ph. Coffee grounds has a ph of about 7 although. In pots and raised beds I use a mix of fine barks and peat moss with added perlite for drainage and aeration. Generic garden compost has lime which blues hate , ericaceous compost is what you should have used in the mix. Iron sulfates also reduce ph and it reacts with soil in about 2 weeks but the effect doesn't last as long as sulfur thou.

  • 10 years ago

    Another thought:

    I planted my blues in a mix of peat, my own compost, and some sand.

    My pH meter at the time showed about 5.5. I incorporated a little sulfur into the mix to maybe get the pH down a little further.

    A few months go by, and my blueberries don't look so good.

    I re-test soil pH and it's up to 7!

    Did some research, and my irrigation water is the problem. It's just city water from the tap, but the pH is about 7.5 and it's loaded with bicarbonate which will send the pH screaming through the ceiling.

    Purchased some acid to help acidify the water before it goes on the blueberries. We'll see how it goes.

  • 10 years ago

    Much easier to control pH level in pots. I killed a very nice blueberry bush after I transplanted it from a pot into the ground. Thought I was doing it a favor. I've purchased another and will leave it in a pot.

  • 10 years ago

    Inkfin, are you hand watering the BB's with the acid water or there is a way you do it via drip irrigation? Your plants look great seems like a lot to hand water though...

  • 10 years ago

    Potting mixes will naturally become more acidic as the components break down.

  • 10 years ago

    Well, installing the drip will get you more free time! Saved me a lot when I finally put it in, was wondering how one would incorporate acid in to the mix on a drip system.

  • 10 years ago

    "Please let me know if I'm missing anything"

    Free time? That's a lot of work and effort for blueberries which are pretty easy. I don't own a pH meter and don't acidify my water, and my plants are doing great, some of my plants are six years old and counting in the same pots.

    If you follow the BB directions at the Dave Wilson Nursery website from the beginning, and you fertilize with a good organic fertilizer (I use Dr Earth acid lovers blend) monthly, you should be fine. It works well for me and takes little effort.

  • 10 years ago

    A well rotted pine sawdust is a great and cheap mulch to keep blueberry soil acid but you need to get the pH down prior to planting or you will need frequent foliage spraying with chelated iron.

    For your pH meter you should order buffer solutions of pH 4.0 and 7.0 to calibrate the meter whenever you use it. Still no gaurantee of accuracy but at least you should be closer than litmus paper.

  • 10 years ago

    to bring down ph quickly, some diluted vinegar and epsom salt will bring ph down long enough for the sulfur to kick in. don't remember the ratio i used. just google it. brought it down 2 numbers with one application!