Software
Houzz Logo Print
toxdocar

Help needed asap on backsplash edge

10 years ago

So the contractor put in a stained wood trim piece today to edge the glass tile we will be putting in as a backsplash. I am thinking it will look weird. What is the opinion on edging a glass tile. It's 4x12. Darker greige tile called Mink.


It should just be caulked right? Matching the grout.

Comments (17)

  • 10 years ago

  • 10 years ago

    And is this the spot the tile should stop?

  • 10 years ago

    I would use Schluter Jolly edging which the tile setter picks out based on the thickness of your tile. The finish on the edging should compliment your cabinet hardware.

    Do the upper cabs end in line with the lower cabs? It looks like there is a difference in the photo.

  • 10 years ago

    Our Schluter edge was chosen to blend in with the tile, not to match our hardware finish.

  • 10 years ago

    The lower cabs come out a little farther I think (not home at moment). Should the tile line up with the bottom cabs?

  • PRO
    10 years ago

    Another Schluter vote.

  • 10 years ago

    Forgot to add. It seems they are thinking the tile stops at the point it can no longer go from up in the underside of the cabinet. So it seems a bit short to me.

    Wouldn't it need to run about an inch longer so edge is flush with the outide of cabinet?

  • 10 years ago

    I think I'm going to run tile to edge of counter.


    So is there something wrong with finishing the edge (cleanly) with caulk matching grout? I see several with glass tiles have done that.

    https://liveyourcolors.com/2011/03/03/edging-options-for-modwalls®-lush®-and-brio®-glass-tiles/

  • 10 years ago
    last modified: 10 years ago

    You have seen your glass tile; do you like how it looks with no edging piece when you look at the tile? If you do, do not use anything for an edge. With that said, the tile setter willl have to make sure that the cut tiles line up PERFECTLY straight on the edge.

  • 10 years ago

    I did something a little different to the edges of my shower tile. I got long matching matte glass pencil tile and ran it down the raw edge. I really like the results. My tile guy had never done that before but said he was going to steal the idea. I think it looks better than the regular schluter look.

  • 10 years ago

    I think we will go with the caulk Edge. I forgot to mention that this stained wood edging needed to be put in another location. Hard to explain but another wall that is along a built-in refrigerator is uneven and where the towel it goes over the wood cabinets for the refrigerator it needed the trim.


    So if I added the metal trim then I'd have two different edges. I think the caulk will be less obvious.


    If there was a tiny glass piece available I could use that but there isn't.

  • 10 years ago

    No, don't run it to the edge of the counter! The extra inch or so of tile at the wall cabinet will draw your eye there as a mistake. In old kitchen photos on the web, pre-Houzz, you'll find examples of it tiled to the counter, but that has fallen out of favor.

  • 10 years ago

    REALLY mayflowers??? I have to decide in the next few hours! It was only a couple of inches so I thought it was ok??

  • 10 years ago

    We've been asked this question many times and the consensus is to end at the upper cabinet. You could probably find some old threads.


  • 10 years ago

    Thanks for the advice!!! That's what I will do then.

    Lord I hope this works out ok. I couldn't make myself like the light colored glass tile (you may remember my post on needing help picking out a tile for a not so busy granite). I had dread in my soul the day I was to tell them what I wanted. So, it turned out there was a dark greige tile (American Olean Mink) on one of the sample boards. Within a few hours I had committed to going dark! So, I hope it was meant to be. I will post pics once it is in.