Software
Houzz Logo Print
alysroom

Flooring Gurus please help me!

9 years ago

I just ordered my saw marked wide plank, red pine flooring for my new build this spring. HOW do I achieve this darkening of the rough spots while keeping the smooth parts pale, straw colour?? I love this look so much and I'm doing it myself so I'm a little scared to screw it up. I would love to hear from anyone with first hand experience!


!

Comments (12)

  • 9 years ago

    You hire a Pro. Pine blotches horribly in the hands of a novice. And face nailing an installation isn't for a novice either. This has the chance to go very badly wrong.

  • PRO
    9 years ago

    No more bare feet in your house , hope you are in your forever home this IMO would be a total turn off for resale

  • 9 years ago

    Thanks for the feedback. I wouldn't say I'm a "novice" I've stained pine that my husband has laid a few times before successfully. It just wasn't saw marked. Just wondering what product gets me both dark and light tones. I'll definitely be doing this one myself.

  • 9 years ago

    Not about the nails (not installing that way) nor the re-sale value (I'll die there) I'm really just after the colour technique. Might this be tongue oil?

  • 9 years ago

    Tung oil. And no. It looks more like amber shellac and a bad stain job and more amber shellac. Maybe a couple of coats of poly on top after.

    I hope you have a great home humidification system and plan to glue and nail down both.

  • 9 years ago
    last modified: 9 years ago

    Any real normal floor sanding will remove those saw marks, so you are going to have lippage galore after installation.

    To get that look almost looks like a wood burning technique where the wood is carefully control charred with a torch. It is obviously an oil based finish on it as the sheen and ambering are not achieved any other way. Fresh real amber shellac could be a component of it, but this has much more in common with faux finishing than it does standard floor staining and finishing. In other words, there will be a LOT of trial and error on the extra % that you ordered.

  • 9 years ago

    That is gorgeous abeatty1954! Well done!

  • 9 years ago
    Ali, thank you. All part of our reno. He really wanted this flooring. So, we negotiated, haha. He chose the bedroom and loft flooring. Wish we could have chosen for rest of home. But, other rooms were already pine.
  • 9 years ago
    As I was typing, looked down and saw pine flooring. They used a minwax stain and this was the result. Ignore the scratch marks. Due to our dog. We know from experience, pine and dogs create scratches. In my mind all part of the "patina". So, as you can see the stain created dark areas. Which is what you are after. Best of luck. Please keep us updated.
    Ali Grant thanked april
  • 9 years ago

    Thanks abeatty! You've been most helpful and I appreciate it ;)


  • 9 years ago

    I just finished my oak dining table and I had a stain mixed at the paint store to get the right colour. I brushed on the stain and wiped it off with cheesecloth as I went along. I would start with a board with the saw marks and test it first. Then you will know what you like. This is what the paint pros taught me to do. You can do this!

    Ali Grant thanked hollyhock3