Software
Houzz Logo Print
rpowell70

Milk paint application

9 years ago
This is beautiful. Can the same be done with ship lap? We plan on doing this on an accent wall and I love the milk pant idea. What is the prep for this? Do you have to sand first?
Reclaimed wood ceiling in a herringbone pattern · More Info

Comments (6)

  • 9 years ago

    Beth, THANK YOU SOOOO VERY MUCH for all of your suggestions and for the links to your projects. I really appreciate your input! We are working on a pool house and used ship lap. I love the milk paint idea. Thank you for sending me that info. Ruth

  • 9 years ago

    Ruth, if you order the milk paint, talk to Dwayne Seever over at The Real Milk Paint Co.

    https://www.realmilkpaint.com

    I've been using him for years. He's so helpful Tell him I sent you over there to try his products. He'll set you up with everything you need.

  • 9 years ago

    I most certainly will let him know you sent me his way! Thank you. So excited to try this on the ship lap for our wall. Now you said to coat the knots first, I'm assuming the milk paint will cover that sealer. How many coats did you do on your ceiling? I love that look. So beautiful.

  • 9 years ago
    last modified: 9 years ago

    Ruth, did you take a look at the link w/my blog? it shows that wood I used on my ceiling prior to install.

    http://makemeprettyagain.blogspot.com/2013/03/reclaimed-wood-herringbone-ceiling.html (click on the pictures to enlarge them for better viewing)

    It was 100 year old doug fir. It was used as framing in an old house they took down. I didn't have to seal it. quick sanding, and a few coats of the milk paint and a little chalk paint here and there.

    if your shiplap is pine, the knots will bleed through any paint. just give them a coat or two of the shellac (comes in a spray can and is clear). your paint will go right over it. I did a dry brush on my wood. barely dipped the brush ends and slightly brushed over the wood. It's a personal choice of how much coverage you want. you could also do a little chalk paint if you want full coverage. with both paints you would want to do a fine sanding when finished. It gives a smooth, even look. if you want a distressed type of look, hit the edges a little more w/the sand paper. Milk paint looks best when given a top coat.(mainly for the rich, deep colors.) if you will be doing white, you can give it a coat of wax, tung oil or even a clear topcoat.

  • 9 years ago

    Our ship lap is pine. Thank you for the information! Looking forward to this project. When we are done, I'll send you a photo!