Software
Houzz Logo Print
jay_grace

was wondering if you could give a brief breakdown on how you built this?

13 years ago
Garage Drop Zone · More Info

Comments (2)

  • PRO
    13 years ago
    Yes, built with 3/4" birch veneer plywood with 3/4" Poplar frame. Basically the floor inside the cubbies are plywood and the ends and seat area are also plywood. The back is 3/4" thick bead board, with trim boards 7/8" Pine. Top trimmed with crown or cove of you choice with 5/4" cap. Then painted with semi gloss Antique White.
  • 13 years ago
    Thanks looks awesome.