Software
Houzz Logo Print
bac717gw

Update on tile choices for Master Bath

9 years ago

About 2 weeks ago, I started a thread showing the choices I'd made for our master bath remodel. After listening to all the thoughts presented, I believe I have come up with a final plan for the tile in the project. The 3 X 12 grey tile, set in a herringbone pattern on the room floor will remain the same. The same 3 X 12 grey tile used around the perimeter of the shower floor with the rest of the shower floor done in the grey tile in a 1" mosaic (set on the diagonal) is also the same as my original plan. What has changed slightly is the tile for the shower walls. I'm still going to use the larger (6 X 18) white subway on the bottom 2/3 of the shower walls and the smaller (3 X 6) white subway on the top 1/3. Separating the 2 will be a cornice piece

And at the bottom of the wall will be this skirting.

Sorry the pics are so large. So, I'll have an all white shower with a variety of elevations (architectural interest?). I'm also thinking the niche should be all white tile, I was considering using the 1" mosaic on the back wall of the niche, but think all white might be better.

Any thought? Thanks so much for your help.


Comments (12)

  • 9 years ago

    Here is a picture of the original tile scheme. All I've done is leave out the marble herringbone as an accent and add the cornice piece and the skirting shown above.

  • 9 years ago

    I think it's going to be lovely in all white with the different tile shapes. What will be the layout, stacked, running bond, etc.

    bac717 thanked localeater
  • 9 years ago

    The upper and lower tiles will be set in a running bond. The vanity backsplash will be the quartz used for the vanity top. The skirting will be on 3 walls of the shower at the base.

    The cornice is only 3" tall. I felt anything smaller with less detail would just be lost between the two sizes of tiles . The skirting is around 6" tall, so each architectural tile is at or about the size of the tile above it. Does that make sense?

  • 9 years ago

    Is the skirting inside the shower? If so I would consider not using it due to the protruding edges where water might sit rather than drain. I like as little depth possible for my shower tiles better for avoiding mold.

    bac717 thanked roarah
  • 9 years ago

    I'm assuming from the photo that the cornice piece has a slight ledge, which reminds me of baseboard or window trim. I would prefer something that didn't stand proud of the adjacent tile, like this Sonoma tile.


    https://sonomatilemakers.com/product/stellar-quickship-canal/

    bac717 thanked User
  • 9 years ago

    The skirting is inside the shower, but the difference in the depth of the tile at the upper edge of the skirting and the large tile is not much. Yes, the cornice piece has a slight edge, but no more than the Sonoma tile.

    Here is the profile of the Sonoma tile.

    I completely understand the concern of the protruding edges or ledges, but I'm not sure how you'd get the look without that detail. I don't mind using a squeegee or wiping down the shower after use. As has been discussed in other threads about the microfiber towels, wiping down the shower keeps it looking like new and requires very little 'cleaning'. We currently have 4" square white tile in the shower with white grout and after 25 years, it still looks very good. With the larger tile on the bottom 2/3 of the shower, we'll have a lot fewer grout lines.

  • 9 years ago
    last modified: 9 years ago

    So it does have a ledge, but it doesn't appear to in the photo. It looks like it's just thicker in the middle.

    I think it should be like chair rail, which is deeper in the center but tapers down on the top and bottom edges. Google chair rail for examples.

    bac717 thanked User
  • 9 years ago

    Here's another option. The top is more curved than the cornice piece.

    This is also from The Tile Shop. I'll have to run over there again and take a second look at this one and the other one called cornice.


  • 9 years ago

    A squeegee only works on flat surfaces which is why I shy away from lips in shower tiles.

    bac717 thanked roarah
  • 9 years ago

    I like that second option. I think this is how the first one will look. It's very traditional.


    Briarwood Lane · More Info

    bac717 thanked User
  • 9 years ago

    I'll squeegee what I can and wipe down the areas missed by the squeegee. That's the price I'm willing to pay for the look, I guess. :)

    That is a good example of the first tile. What catches my eye in that picture tho, is how they've treated the outside edge of the tile and how the shower door works with the tile profile that sticks out.

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert