Software
Houzz Logo Print
peter_clark30

Fiberglass treatment?

9 years ago

So I had a rep from Renewal by Andersen come by for an estimate today. He was of course singing the praises of their fibrex material which may all be true. The thing that I do question though is that he said fiberglass windows and door need regular treatment to protect them. He mentioned just like people with fiberglass cars are constantly waxing them and such, that if you don't do that yearly it can break down in the sun. I have a fiberglass sliding door that is about 2 years old (from Pella) and the Renewal guy recommended wiping it down with some Armor All.


Is this at all true? I can't find anything to back it up. My gut just didn't quite trust that part, even though I trust the guy on everything else. It just didn't pass the smell test to me.


Thank you!

Comments (11)

  • 9 years ago

    Thank you! That is what my gut was telling me. Glad to know I made the right call since I passed on signing that night which would have saved about $1.5k versus deciding to go with them later this month. They were only the first quote I got though so more quotes on way.

  • PRO
    9 years ago

    Peter,

    While the RBA is a pretty window, there are at least comparable (if not better) options out there. Just depends on what you want your window to look, feel, and perform like.

    Peter Clark thanked Windows on Washington Ltd
  • 9 years ago

    we installed marvin infinity woodgrain look unfinished and homeowner (means me) applied gel stain and 2 coats water based polyurethane topcoat...General Finishes High performance topcoat. Definite learning curve with these products on fiberglass...but much better than any vinyl....what has led you to fiberglass?...in our case I wanted longevity...a wood look interior. At the time the alum clad exteriors were all in class action suits for moisture and rot/decay issues.....that may not be the case any more.

  • 9 years ago

    "At the time the alum clad exteriors were all in class action suits for moisture and rot/decay issues."


    Whose were and when was this?

  • 9 years ago
    last modified: 9 years ago

    pella/Andersen....any/all clad products...as quoted by several salespeople at our local various lumber yards....."the entire wood/clad industry is suspect.....cannot guarantee this won't happen with any of the manufacturers" this is early 2000's so I can't remember the name of the salesperson...but why would you tempt fate......my solution was to wait..do research and I picked the fiberglass in 2008.......hey-if a homeowner chooses to relate their experience past and present, isn't that's how the info is to be taken here. I AM NOT A QUALITY CONTROL TECHNICIAN...I am relating my experience.

  • 9 years ago
    last modified: 9 years ago

    So polymer finishes have 2 issues on the exterior. One is UV light which has an electrical phase opposite that of the bonds holding man made molecules together, so its called a burning ray but its more like a short circuit. Two is simply oxygen, especially on a clean polymer surface as weather would clean it over time. When you have heat, and oxygen, oxidation will occur at a fair speed. The use of armorall should be banned because just like the rep described most people think of it as a preservative when in fact they were trying to describe a silicone polish or wax. The mineral oil in the armorall is a substance that cannot plate and preserve like a lubricating oil so its a throw away from crude oil refinement as is its sibling parrafin wax. It breathes oxygen, so mineral oil is used as baby oil and skin lotion and therefore as a preservative for oxidation it really sucks.

  • 9 years ago
    last modified: 9 years ago

    Andersen doesn't and has not used an aluminum clad exterior finish (exception being the E-series or Eagle line they purchased) and they have never been involved in any lawsuits for the cladding, nor have any other quality products as far as I know. Pella on the other hand, yes. Although they were sued due to the fact that they use roll form clading on their sash which is comparable to a soda can material and yes that does fail. They fed you a line of BS plain and simple, quality product, extruded aluminum exterior and you will have no issues.

  • 9 years ago

    Not saying that the correct fiberglass window is not a sound choice at all, just stating that the line they fed you was not correct as all and even less so today.

  • PRO
    9 years ago


    Andersen uses pretty much every product on the exterior of their windows including fiberglass on their top of the line A-Series

  • 9 years ago

    Didn't know that Todd thanks.