Software
Houzz Logo Print
michaelgalex

Curbless shower leaking

9 years ago

Hello. We just had a curbless shower installed in a second floor bathroom and it is leaking through to the first floor. The installer said he might have to tear out the shower pan because a nail "may have" penetrated it during installation. There must be a less radical solution. The enclosure is glass on two sides and ceramic subway tile on the other two sides. The tile floor inside the shower is penny tile; outside it is 8x8" cement Cuban tile. After the installer went in the ceiling below, I checked myself and saw water beading directly below where the shower pan bends up the wall in the shower corner. This corner is where glass and tile meet. There is a 1-1.5" thin line of wetness running along the edge of the wooden support, just below the shower pan. I did not see water anywhere else in the ceiling, but it is difficult to get a complete picture due to floor joists and the subfloor.

What I saw makes me think the leak is actually limited to the corner of the shower, which is farthest from the shower head. I also checked this evening and discovered a lot of water pooled in that corner, which makes me think the drainage is insufficient, possibly due to insufficient pitch.

Please let me know if you have any ideas. We paid a lot for this, especially the cement tile, and would hate to have to tear it up and start over again. Thank you for your help.

Comments (7)