Software
Houzz Logo Print
12358w

How long should sheers be?

8 years ago

I plan on doing floor length drapes on this window that we‘ll never close. For privacy, I’m adding sheers. The sheers can’t cover the baseboard heat (hydronic), so should they come to the top of the heater or just the bottom of the window trim?


Comments (15)

  • 8 years ago

    Will the sheers always stay closed? If so, you might want to think about sheers gathered on tension rods at the top and bottom of window.

    12358w thanked torreykm
  • 8 years ago

    Another option would be cafe sheers, which would look better than short sheers (not too attractive). 3/4 would work.

    If you must tho, stop them at the sills, not below.

    12358w thanked shadylady2u
  • 8 years ago

    Floor length drapes will cover the heater also. If they are wider than the window, they will cover the light switch.

    12358w thanked yvonnecmartin
  • 8 years ago

    The bottom of the window trim, but I really like the idea of sheers on tension rods top and bottom like these, but more sheer and white covering the whole window.

    12358w thanked houssaon
  • 8 years ago

    Thanks for the ideas!

    I hadn’t thought of the sheers with rods on top and bottom. Will that look ok with full length drapes?

    Im not worried about the drapes over the heat, only a small part will be covered.

    Im not sure what to do about the light switch. Either the drapes have to end right at the window trim, or maybe have a higher profile drapery rod so you could reach behind it.

  • 8 years ago

    I would do a roman shade or shades that go up or down. You can have privacy and still see out.

    12358w thanked Kathi Steele
  • 8 years ago
    last modified: 8 years ago

    For a window treatment to look good, the curtains should be hung outside the window frame and look full enough to cover the window, even if you don't intend to close them.

    That means you'll have curtain covering your light switch and door jamb and you'll have a fair amount of curtain hitting your heat source.

    In addition, panels and sheers of different lengths will look off. I would look for other options besides panels and sheers.

    Without seeing the rest of the room, roman shades or valances with pull down shades or blinds might be an option. There are many valance styles that can look dated so you'd have to do some searching to find something stylish. There are some styles that look like a cornice that are nice.

    I like the shape of this one.

    12358w thanked deegw
  • 8 years ago

    Thanks for the feedback. The window overall is 105” wide with 3 windows. I had a valance, but I want to do something different. I want something that provides a little privacy all the time, which is why I’m looking at the sheers. Also, with either a valance or Roman shade, too much of the top if the window is covered since the crown molding is only a few inches above the window. Im going to do 4 panels total (one on each end, then in between each window)

  • 8 years ago

    Beverly, I hadn’t thought of those. How translucent can you get those? Would it look weird if we left them how they are in your second picture all the time?

  • PRO
    8 years ago

    The manufacturer and the material you select will determine the level of translucence. The purpose of the shades is to meet your needs, so any position you place them will be correct. Sheers are so dated and frankly, in front of the baseboard heat will likely discolor them over time.

    12358w thanked BeverlyFLADeziner
  • 8 years ago
    last modified: 8 years ago

    Just posting option that depends on what your room needs as to style, and sewing, etc... but this is pretty to me... I suppose whatever cellular shades, etc... go under. Thermal type if it gets cold outside.


    [https://www.houzz.com/photos/hampton-designer-showhouse-with-ka-design-group-contemporary-family-room-new-york-phvw-vp~1953053[(https://www.houzz.com/photos/hampton-designer-showhouse-with-ka-design-group-contemporary-family-room-new-york-phvw-vp~1953053)

    12358w thanked everdebz
  • 8 years ago

    I love the idea of pretty roman shades in a nice fabric. Your stack back area is rather small next to your door for drapes & I wonder if it's a fire hazard to have drapes over the baseboard heater?

    You have pretty woodwork around your windows. Even if you got woven shades from HD/Lowes would look nice.

    The sheets on tension rods has me thinking about my bathroom--thanks for sharing that!!

    12358w thanked Peppapoodle
  • PRO
    8 years ago

    Your windows are not tall. Do not select a window treatment that renders them even shorter. You first direction with fixed panels will work for the space and aid in acoustics if that is an issue.

  • 8 years ago

    Thank you all for your input!