Software
Houzz Logo Print
reckless7

Serious Shower Tile Problem

8 years ago

2.5 years ago I had glass mosaic tile installed in the master shower of my new build house. Recently, while spacing out in the shower I was shocked to see various cracks and marks behind many of the tiles. I took a look at a sheet of leftover tile and it looks perfect i.e. individual clear glass tiles with individual square backings, all covered with a mesh. We clean the bath regularly and as you can see the grout is clean and mildew free. Does anyone have any idea what this stuff is and how it got in there? Should I be concerned? Thanks!


Comments (14)

  • 8 years ago

    Following

  • PRO
    8 years ago

    I don't see any of the cracks you are talking about

  • 8 years ago

    following

  • 8 years ago
    The OP is talking about where the arrows are .......
  • PRO
    8 years ago

    Oh my! Have you reached out to your tile installer?

    ‘I hate to say this but it looks like an installation issue

    reckless7 thanked Leanne Michael L U X E lifestyle design
  • 8 years ago
    last modified: 8 years ago

    Is the sanded grout sealed with a product like Grout Shield or is it unsealed grout? It looks like there is moisture wicking in from the shower side of the wall or potential moisture infiltrating from the backside. Are there any hairline cracks in the grout along the bottom of any of those tiles?

    reckless7 thanked Emily M
  • 8 years ago
    last modified: 8 years ago

    From what I understand sealing grout doesn’t make it waterproof or impenetrable by water, it prevents staining.

    reckless7 thanked User
  • 8 years ago

    I presume it's small bubbles in the thinset. As long as the grout is continuous, I don't think that this would have to be a problem, but I surely defer to those with professional waterproofing expertise.

    reckless7 thanked acm
  • 8 years ago

    I don't think those are cracks, I think that line is the bottom back edge of the tile and the stuff below that is stain or mildew on the bottom edge of the glass tile

    This back edge is often visible on backsplashes with the undercabinet lighting on and it surprises people. You've taken something translucent and smeared something opaque on the back of it. It changes the appearance somewhat from the outset. And now it appears you are picking up something out of the grout which is going through continual wet/dry cycles.

  • 8 years ago
    last modified: 8 years ago

    palimpsest & BethH, I think you are both right. Under the circumstances, I feel this could spread. What do you think would be the easiest and most cost effective way to fix this. Does it make sense to have the grout replaced?

  • 8 years ago
    last modified: 8 years ago

    reckless-

    Unfortunately, you can't just replace the grout. There is no easy and cost effective solution. In order to resolve this, it's a complete redo. All the tile must come off. This also means replacing the substrate that the tile is mounted on, and then the whole surface must be waterproofed before new tile can be installed. I doubt that you it would be worthwhile to try to salvage the substrate. And, if it's not cement board it really needs to be replaced in any case.

    reckless7 thanked kudzu9
  • PRO
    8 years ago

    Mildew like this probably lives behind all tile, we just can't see it. Another excellent reason to use solid surface in your shower. No grout, no mildew, ever.

    reckless7 thanked Joseph Corlett, LLC
  • 8 years ago

    Joseph Corlett, LLC, Lesson learned!