Software
Houzz Logo Print
kanderson6092

Installing a Ceiling Fan Purchased from India

8 years ago

Hi,

I purchased a ceiling fixture (light and fan) from India and now I (and the builder) are having difficulty identifying the converter we need to safely install this fan. I am reaching out hoping that someone can offer any advice. The voltage in India is 220/240. Our home is 110. Thank you.



Comments (27)

  • 8 years ago

    I'd buy a 110 fan, TBH.


  • 8 years ago

    I would be surprised if ay electrician will install this fan as it won't carry the required US safety and compliance certifications.

    And as for the converter, an electrician should be able to do it - whether they will or not is another question.

  • 8 years ago
    last modified: 8 years ago

    They are willing but only if we find a safe solution. I am thinking my beautiful fixture is ending up in the attic. :(

  • 8 years ago

    Something you should have checked on before purchasing, not after.

  • PRO
    8 years ago

    No electrian I know would touch this.

  • 8 years ago

    Perhaps the entire motor can be swapped. I have purchased gorgeous 1920's light fixtures offshore knowing they must be rewired before install.

  • 8 years ago

    Hi Angel - scolding not necessary. Thanks everyone.


  • PRO
    8 years ago

    You may be able to send the fan to Underwriters Laboratory to have it tested and certified . . . but check the cost before boxing it up.

  • 8 years ago

    It's also probably 50Hz.

  • 8 years ago

    We just went through this with some antique light fixtures we purchased. Our electrician refused to install them because they were not UL listed. When he explained how unsafe they were, I was actually happy he refused. We ended up buying new fixtures.

  • 8 years ago

    India is indeed 240V @ 50Hz. In most places it is indeed illegal for an electrician to install these. I'm less pessimistic on you putting it in yourself after the CO is taken care of. However, the effort to get this to work on US power is going to be problematic.

  • PRO
    8 years ago

    And if by chance that starts a fire you have no insurance , forget it and move on. BTW what is so special about this fan maybe post a pic and we can see if someting about it is worth reworking.

  • 8 years ago

    How did that fan make it into the US marketplace? Return it in and install a 120v 50hz unit. Shouldn't be to difficult to source.

  • 8 years ago

    If it's the blades you like, would it be possible to put those on a US-market fan?


  • 8 years ago
    last modified: 8 years ago

    And if by chance that starts a fire you have no insurance

    This is largely a myth. There are two broad types of homeowners policies, named peril and open peril.

    Named peril policies will include a list of items that are covered, and every policy that I have ever seen includes fire loss as a covered peril, some even specify a casualty loss from faulty wiring. I have never seen a policy that only covers properly permitted faulty wiring, and no bank would knowingly permit such a disclaimer on insurance carried for satisfaction of a note.

    Open peril covers everything that isn't specifically disclaimed, and I have never seen an unpermitted work disclaimer.

    Everyone seems to know someone who knows someone whose home owners claim was denied because they did unpermitted work. However, people who have suffered the unrecovered casualty loss first hand are an elusive group. This isn't to say that these limits don't exist, but they are rare.

    --------------------------------------------------------

    To the OP

    Just take the fan to an electrical appliance repair shop and have them change out the motor for you. Half of the electrical stuff and power tools I had in the Middle East were purchased here and shipped there. We just took the stuff to a small appliance place and they would change out the motor or power supply. If he can't replace it for some reason he will let you know, but that is unlikely. The new motor will be UL listed and the electrician should have no problem installing it.

  • 8 years ago

    Thanks everyone for all of your input. So in summary, this fan was a compromise between me and my husband. I bet this scenario is familiar. Hubby wants ceiling fan in bedroom. Wife wants something pretty. I thought this fan would be the perfect compromise. I discussed (in length) with the company if we could install in the US and they guaranteed we could (with a convertor) and provided several examples of places that did (e.g., Starbucks, Marriott Hotel). Anyway, cannot return fan. Will get another fixture but will try to see how we can salvage this at some point. For those of you who are interested - below is the link to the fan and how they suggested we convert the fan for installation. I am too scared to do that based upon all the comments.

    And again, thanks all. First time I have used this site for questions and it has been very helpful. So off to my next challenge as a newbie building a home. Other lesson learned: Building a home is not for the timid!

    Company Website:

    https://www.fanzartfans.com/product/dew-drops-crystal-ceiling-fans-fanzart/

    Suggested Conversion:

    Simran SMF-100 Universal 100W Travel Voltage Converter for Both 110-volt and 220/240-volt Worldwide Use



  • 8 years ago

    Forgive me if I'm way off base...but doesn't this look identical to the one in the link?

    https://www.amazon.com/RS-Lighting-Retractable-Chandelier-Bedroom-Chrome/dp/B06Y4517PB

  • 8 years ago
    last modified: 8 years ago

    Removed simultaneous post

  • 8 years ago

    You are right - I found these this morning. Can't explain why I did not see them before -- only excuse I have is overload and just stupid.


  • 8 years ago

    Any conversion will most likely generate unwanted noise. BZZZZZZZZZZZZZZZZZZZ.

  • PRO
    8 years ago

    Publically only acknowledge the "overload".

  • 8 years ago

    Beautiful fan, no wonder you wanted it. Good luck.

  • 8 years ago

    The problem with that converter is that it is not intended to be used in construction.

  • 8 years ago

    Converters are for plugged in appliances, not hardwired fixtures. That company fed you a little me of BS just to get a sale. You need to leave a review stating so.

  • 8 years ago

    Thanks everyone. Great feedback and for sure I will provide a review.

  • PRO
    8 years ago

    Great-looking fan. Good luck!