Software
Houzz Logo Print
jose_gonzalez2515394

looking to replace subfloor with cement

8 years ago
I'm removing the subfloor and adding cement floors. looking for cement guys for a 400-500sq area.

Comments (11)

  • 8 years ago
    haha ok.
  • 8 years ago

    Is that the project? I was asking whether or not that was your plan?

    What is your plan at this point? Where is this home? What are code requirements where you are?

  • 8 years ago

    Are you just wanting to pour cement in there like that???

  • 8 years ago
    no I'm throwing away the subfloors and cleaning the space first.
  • 8 years ago
    I agree it's a big project that's why I'm taking it on. you should have seen the 3 layers of drywall and laminate before the exposed brick. I do plan on leaving the exposed brick in bathroom . I'm planning on that later. right now is the floors.
  • 8 years ago

    OK....the moisture mitigation (both cement slab and brick walls) must be done at the same time. And the mold remediation needs to be done before that.

    And then removing and replacing ALL WOOD THAT IS touching or EXPOSED to raw earth (including in the walls, floors, under doors, etc) must be removed and replaced. That must be done BEFORE the floors/moisture/mold remediation is done.

    Any/all drywall or plaster that shows any moisture contamination/mold must be removed and replaced. That gets done with the WOOD replacement gets done.

    And just for some fun and excitement, you MUST TEST for LEAD and ASBESTOS! If the house or materials are OLDER than 1978 (and it looks MUCH older than that) you WILL HAVE both products in or on any surface you see in those photos.

    The remediation must be done professionally. Again, a remediation company that is HIGH END can do ALL THE WORK you need to do BEFORE you pour a cubic inch of concrete.

    Where are you located?

  • 8 years ago
    thank you I'll look for one of these remediation places first.
  • 8 years ago

    That is a teardown and rebuild.

  • 8 years ago

    Where are you located?

    And Sophie is getting at something that is a strong option = tear down.

    It is HIGHLY POSSIBLE that the "fix" = $100,000 or higher. And that does NOT include plumbing upgrades (if you TOUCH IT you MUST BRING IT to code) or electrical codes (if you TOUCH IT you MUST BRING IT up to code).

    And then you have to FINISH the space = $15K - $30K.

    Imagine what can be done on your property if you tear down ($30,000) and rebuild for the same amount = $100,000.

  • 8 years ago
    last modified: 8 years ago

    Yeah I'm having a discussion now with a few companies on the options. Just a little background I'm in the construction trade, not entirely clueless. I appreciate the opinions but I dont think this is a tear down and those numbers are quite inflated. 30K for a teardown...wont cost that. 100k for a house in my city is a pipedream most house builds here are 400K+ if this was a suburb of cleveland perhaps.

    Not running a shady rebuild was looking for recos on cement guys, I know what needs to be done here. I'm pulling permits already and this work needs to be done.