Software
Houzz Logo Print
kendra7998

Tint an already painted/printed canvas

8 years ago

Hi All,


I purchased a matching set of canvases that I love but they have kind of a pink/purple tint to them. I bought them before I settled on what I wanted the room to look like and unfortunately, the color of these pictures throw everything off.


I bought them from Overstock and here's what they say about them:


"The Canvas Art Print is produced on water resistant canvas with a UV-Resistant gloss coating and wrapped on a wood frame."


I'm wondering if there's a way to tint them and make them a different color. It's concerning because the hands are already sort of muted with an overlay of a wood texture and white splotches. I've seen tint spray paint but does anyone have experience with that?



Comments (15)

  • 8 years ago

    You risk totally ruining them.Pictures of them in the room, and the whole room would help.


    There may be a way to settle them that you don't see.

    Kendra thanked User
  • 8 years ago

    Only way to get anything to stick would be to use sandpaper to rub off the finish -- but I don't think it's worth the trouble. No guarantees what you want to do will work. I'd shop for real art this spring and summer at art fairs and support the local artisans. Good luck!

    Kendra thanked User
  • 8 years ago

    If you can't use them as is and they weren't expensive, I'd definitely try something. Maybe like a very thin watercolor wash (think kid's paint set) in a color to better suit you and neutralize the pink. Is it possible to try a little on the edge where it is wrapped and wouldn't show?

  • 8 years ago

    It's a water resistant canvas. Maybe you could you find a new place to hang them in your home.

  • 8 years ago

    Yaya, I only suggested water color because the canvas WOULD be resistant - wouldn't soak in to ruin it, but maybe lay on top. But your suggestion is much better!!

  • 8 years ago

    Thank you all for your suggestions. The pictures were cheap enough so I’m willing to play around with them to get a better result. I’m going to try YaYa’s suggestion and see how it turns out. Thanks again!

  • 8 years ago

    latex house paint thinned out with water. try the edges of the canvas, as that won't be really visible.

  • 8 years ago

    Take a photo of them and then play around with their color with a photo editing program then print them out on whatever you want- canvas, etc at a printing shop.

  • 8 years ago

    Dying to see what works.


  • 8 years ago
    last modified: 8 years ago

    I would use a light stain...It would tone down the pinks and give it an antique-y effect...

  • 8 years ago

    A glaze (like Behr's faux glaze) mixed with a little craft paint would put a sheer tint over the canvases. Test on something like posterboard first to see how much paint you need for light color but not opaqueness (is that a word?), I'd start with an 80% glaze/20% paint mix and go from there.

  • 8 years ago
    I would try a light transparent stain or dye.
  • 8 years ago

    Water-resistant canvas is immaterial. The prints themselves are printed with water-based ink-jet inks (that's why they need a UV coating), which will run if they get wet. They may call it 'giclee', but it's just an ink-jet printer, with all the same problems.

    What in the world is the point of 'water-resistant canvas' anyway? It's cloth. What's the point, unless you're going to hang them in the shower?

  • PRO
    8 years ago

    IMO get something new and sell these on line or hang them in a powder room